flat head screwdriver behind it and ease it out.

only clips in

 

thanks, i think ill wrap the screw driver in tissue paper befor i do any thing.. dont want to scratch the wing

!

thanks Sam.

 

Judging by your Username I'll assume you have a Mk1 - unscrew the two stainless (Phillips head) screws from either side of the unit to remove & as Gareth stated, the side indicators clip out.

Assuming this is what you intend, you won't be able to spray the inner side of the front units without first splitting the entire bonded assembly via a trip to the oven, directions of which can be found *HERE* next to 'Convert your front indicators to clears'.

 

use a credit card or similar for the side ones

be careful when removing the bulbs from the front units as the plastic hardens

they have the strength of rice paper

 

ahh thanks for your help guys, got them out and done in the end, im soo happy with the results, have a look on my project thread and see what you guys think..

heres a link...

http://www.mx5nutz.com/forum/index.php?showtopic=81375

the photos will be on there in about 5 mins...

 

tell me what you guys think