I bought a gearshift boot kit from MX5 parts and fitted that as the old one was pretty torn up.

I then saw a group buy over on MX5 Nutz for Meister-R Zeta S coilovers.

These get great feedback so I decided to go for some - they really are beautiful things, almost too nice to hide under a car

I also bought some mirrors to replace the OEM chrome ones as the spring on my drivers mirror has broken and the mirror won't stay in place. To be perfectly honest, they weren't the best but would do for the timebeing.

Sitting on Meisters and new mirrors:

I saw a guy on one of the MX5 Facebook groups making reinforced door stops so decided to go for some as they apparently help a little with stiffening things up.

Next up was a replacement exhaust - Moss had a deal on and it was too good to pass on - the car had a new OEM exhaust fitted when I bought it but I wanted something with a bit more burble...

 

I spent an afternoon in the local scrappies, looking for some wee bits of trim my car was missing and struck lucky with the only mk1 that was in there! It's the small things..

Bonnet trim

Headlight trim

Then came another big spend - I had been looking for some aftermarket alloys. I knew I didn't want to go too big, and in the end decided to stick with 14" although went up from 5.5 to 7" width. I absolutely love these alloys!! Note: Still not fitted, need to get them coated i G-Techniq C5 and some tyres on them ready for this year.

How light?!

Around the end of September the weather was turning and my thoughts were towards making sure my wee Eunos didn't rot away to nothing (not that she sees many inclement weather days to be honest). So I took her through to Preserve & Protect in Johnstone for a full Dinitrol underseal - what a great job!

 

Next up were some retro toggle switches for the hazards and headlights from Revlimiter. Adam makes some really cool stuff and these had been on my list for a while!

I then decided to de-tango the sidelights, and sand off all the raised letters on the outside of the lights/indicators/reflectors - stops wax getting stuck in amongst them and freshens everything up a bit too.

I also fitted some LED sidelight bulbs and silvatec indicator bulbs.

 

I then saw some lovely Zoom bits for sale on Nutz - I missed out on the Zoom filler cap but I did get my hands on some lovely carbon mirros to replace the dodgy ones I had fitted previously.

I bought an induction kit (cone filter and heatshield) from a guy on MX5 Scotland - I am in the process of fitting this currently.

Next up were some matching window toggle switches and built in cup holder from Jass Performance. I also bought some brushed metal vent rings.

Whilst she has been in the garage over the winter, I have been attacking her with my dual action polisher and loads of wax:

 

Which brings me up to this month.

I have had the car in the garage, up on my new CJ Autos adjustable car ramps as I wanted to remove the aircon (I also have an annoying oil leak to source/sort). This never worked, and with it being old, illegal gas required, I decided to junk everything - the pump, radiator, condenser, pump bracket - all that lot weighed in at around 18kg of weight savings! I have sourced a non-aircon crossover pipe to connect the heater to the blowers behind the dash.

I decided to keep the aircon fan for some additional cooling to the engine should I need it.

Quite a lot to remove:

Those car ramps..

With the aircon rad removed, my main rad was in the firing line for any stray stones, so I have fitted an IL Motorsports grille.

I removed the washer reservoir and header tank to clean them (dishwasher tab & boiling water works wonders!) but when I filled my header tank I noticed water coming out a hairline crack in the corner so a replacement was sourced from Autolink.

I saw someone selling a silver strut brace, the same as the yellow one fitted to the S-Special, I had never seen one in silver and was lucky enough to nab it.

I have also got some silicon coolant hoses from Stoney racing.

[

So, what's next?

Well the car will be taken off SORN in April and MOTed.

I need to get the new tyres fitted to the Enkeis and get them on the car.

Hopefully fix the oil leak and cure the gear lash that she suffers from on overrun as well.

I still have further plans and will update this thread as and when they happen.

Thanks for viewing, apologies for being a bit of a photo whore

 

Looks nice. It amazes me though the with what goodwood charge their cars still need the odd thing here and there

 

Good work so far. Looking forward to seeing the new wheels fitted.

 

nice car and so clean underneath, i'm jealous of your wheels in my opinion the perfect wheel for a mk1.

 

Great looking Mk1 ... nice work so far :thumb-up:

 

Nice write up :thumb-up: Can't wait to see the wheels on the car, they are a personal favorite of mine.

 

What a lovely car. Gonna look great on the enkies

 

Looks great....wheels are fantastic....I never knew that place existed in Johnstone. ..I'm only a few miles away in Paisley. ...did my underseal myself....they look as if they did a great job....love the v spec interior.

 

I fitted my new Zoom filler cap yesterday - been after one for ages to go with the Zoom mirrors!

Love the look of these, although I did strip the threads on the remote opener when putting it back on so a wee call to Autolink tomorrow methinks.

 

I fitted my replacement filler cap release tonight (bought from Autolink) and everything closes nicely now.

I finally got my induction kit fitted - I know about heatsoak and all that, but I love the induction roar you get with these so i'll run it for a wee while to see how it sounds.

I just need to refill the coolant system and get everything nice and hot to check for leaks.

Then it's to be booked in for a fresh MOT and get the ting off SORN and on the road for the better weather.

 

So, after passing her MOT last week with no advisories, I thought it was a bout time I got my new alloys on.

I went through to Skidz in Falkirk to get the tyres fitted yesterday, decided on 195/60/14 Vredestein Sportrac 5 and really glad I went for the slightly wider tyre and bigger sidewall - I love the retro balloon tyre look.

The wheels look ace, I gave them a coating of G-Techniq C5 before fitting. The only slight issue is the balancing weights are just skimming the brake callipers (running 1.8 brakes) so I need to take a wee bit off them to stop this.

Makes a massive change to the car and I am completely chuffed with how she looks now.

**Warning - loads of photies ahead **

 

Really nice car and those wheels look great on it.. they fill the arches well.

 

Really nice car and those wheels look great on it.. they fill the arches well.

Thanks mate

 

I am sooo jealous of those wheels!! Really tidy car as well

 

Really, really beautiful car mate!

I've had my 14x7 RPF1s for nearly a year and finally getting tyres fitted tomorrow. Funnily enough, I chose the Sportrac 5 in the same dimension, and after seeing how good they look fitted on your's, I'm glad I did!

 

Really, really beautiful car mate!

I've had my 14x7 RPF1s for nearly a year and finally getting tyres fitted tomorrow. Funnily enough, I chose the Sportrac 5 in the same dimension, and after seeing how good they look fitted on your's, I'm glad I did!

Cheers mate.

Get some photos up when they have been fitted bud. I love the slightly wider dimensions of the 195/60!

 

So I finally got round to filing down the front callipers slightly to prevent the wheels weights from rubbing against them.

There is now a slight gap,I believe the official measurement is a bawhair :lol:

Gave the filed areas a coat of the g-techniq c5 polymer coating I put on the alloys to kep rust at bay.

I also checked my drain channels using my new trombone cleaner but nothing came out as they are clear which is peace of mind!

 

I finally got fed up of my glacial electric windows so decided to have a go at cleaning/regreasing everything to see if it improved things.

I also used the opportunity to fit the sound deadening and new speakers.

Before I started, the line up of required products:

White lithium grease for the metal runners, silicon spray for the rubber channel attached to the quarterlight

Door card before I attacked it:

Attachments removed:
[

Doorcard off:

Inner waterproof barrier removed (really messy glue used):

Rear channel view from above, note missing guide wheel!!:

Lower window until these three screws are visible (removed in pic) this holds the glass on to the window mechanism:

Remove the 2 white plastic stoppers as well and the window should be able to lift out of the door:

Store it out of the way!:

Front runner/channel:

Runners are held on by these 3 14mm nuts:

And these 3 on the bottom edge of the door:

I decided not to remove cables from front runner, rather just lay it on the top of the door and clean in situ:

Whereas I completely removed the rear runner for cleaning:

Lots of lovely old, hardened grease (white spirit and q-tips make light work):

Replacement rear guide wheels sourced from a Mk2 at the scrappies Sunday morning (thankfully found one with manual windows so I could manipulate the glass to remove):

Found the old one sitting in the door!:

Started fitting the sound deadening before reassembly:

Fitted some around the speaker hole to help absorb vibrations:

Passenger side done as well:

Refitting is the reversal of removal, just be careful when putting the glass back into the door and sliding it down to meet with the holding bracket.

Don't fully tighten the 14mm nuts on the guides until you have checked operation of the windows, then when you are happy, nip them up.

Car rides so much quieter now, no doubt helped by replacing the missing rear guide wheels and the sound when closing the doors has improved dramatically oors has improved dramatically

 

That's my job soon too. Thanks for the comprehensive detail into what you did.

 

It was great to actually get in and give this wee car the drive it deserves yesterday!

Absolutely loved the spin up to Braemar for Scot5 2016, and loved being in amongst a bunch of likeminded dafties in their MX5s

Really pleased with how she behaved, and I have confidence that I screwed everything together correctly after my winter fettling.

Managed to sneak a couple of wee shots of the car at Glenshee on the way home.

 

So Saturday 3rd September 2016 marks the 25th birthday of my wee Eunos.

To celebrate,I've bought her some new door cards, tan crash pads and a brushed metal finish HVAC panel to tart up her interior a wee bit.

Here's to another 25 years!

Sent from my SM-T810 using Tapatalk