Mazda MX-5 Miata banner
1 - 6 of 6 Posts

·
ターボパワー
Joined
·
3,407 Posts
I been googling around everywhere and am struggling to find any good information.

what pros & cons are there to split Polyurethane bushes. vs the solid units both still have the metal sleeve you can remove.

Is there any pro's and cons?

are the splits easier to install?

Why do they do split bushes?

Cheers,

Lawrence
 

·
My boys in an Atom 300!
Joined
·
1,387 Posts
Splits are undoubtedly easier to install, however they weaker than the single piece items and therefore should only be used in specific locations. For the MX-5, that's the rear upper wishbone and rear upper upright that attaches the aforementioned.

Please don't buy anything but SuperPro. If you're going to AS this weekend, talk to them and you'll find out why.

Phil
 

·
ターボパワー
Joined
·
3,407 Posts
Discussion Starter · #3 ·
Splits are undoubtedly easier to install, however they weaker than the single piece items and therefore should only be used in specific locations. For the MX-5, that's the rear upper wishbone and rear upper upright that attaches the aforementioned.

Please don't buy anything but SuperPro. If you're going to AS this weekend, talk to them and you'll find out why.

Phil
Hey Phil,

thanks for the information.. SuperPRO it is
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top