[atlex]

That's 1.6 and you should, I think, just be able to use a standard NA / MK1 1.6 cam cover gasket.

Think about it - the cam cover has to still match the actual head of the engine., whether it's the original mazda one or the ford/protege one..

Don't forget to put some RTV in the corners around the CAS and CAM Gear arches.

Also .. just try snugging down the bolts. you'd be surprised by how often they just aren't nipped up far enough.

 

[atlex]

Gosh, it is a 1.8 I must be going blind. All the K20 Kpro tuning.

definitely don't go hard on those bolts, they're small, but check they're not actually loose