Mazda MX-5 Miata banner

1 - 18 of 18 Posts

·
Registered
Joined
·
3,670 Posts
Discussion Starter · #1 ·
It would be interesting to know how many are doing the conversion. Stick your name on the list and how near to completion:

Barry Spiers - Completed - Tuned & Dyno'd at 200hp - very happy
 

·
Registered
Joined
·
2,323 Posts
Barry Spiers - Completed - Tuned & Dyno'd at 200hp - very happy
Jamie - Completed - a few niggles to resolve but happy. Adaptronic fitted & tuned. Intercooler and crank overlay to come...
 

·
spending too much money
Joined
·
1,176 Posts
Barry Spiers - Completed - Tuned & Dyno'd at 200hp - very happy
Jamie - Completed - a few niggles to resolve but happy. Adaptronic fitted & tuned. Intercooler and crank overlay to come...

Tom Gee - uncompleted - awaiting delivery of charger + MSpnp (mk1 1.8)
 

·
Registered
Joined
·
12,243 Posts
Barry Spiers - Completed - Tuned & Dyno'd at 200hp - very happy
Jamie - Completed - a few niggles to resolve but happy. Adaptronic fitted & tuned. Intercooler and crank overlay to come...
Tom Gee - uncompleted - awaiting delivery of charger + MSpnp (mk1 1.8)
Vindi49 - uncompleted - most parts collected, need to make new brackets due to change of engine to Mk2!
 

·
Registered
Joined
·
3,535 Posts
Might be worth putting setup too....

Barry Spiers - Completed - Tuned & Dyno'd at 200hp - very happy
Jamie - Completed - a few niggles to resolve but happy. Adaptronic fitted & tuned. Intercooler and crank overlay to come...
Tom Gee - uncompleted - awaiting delivery of charger + MSpnp (mk1 1.8)
Vindi49 - uncompleted - most parts collected, need to make new brackets due to change of engine to Mk2!
Mel - Completed - MS1 v3.0, FMIC, 14% reduction pully - self tuning (for now) - VTPS to go on soon...162 pre tuning, FMIC and smaller pulley..
 

·
Registered
Joined
·
3,670 Posts
Barry Spiers - Completed - MS1 v3, FMIC, 11% reduction pully, LC-1 O2, Duel TB's, Tuned & Dyno'd at 200hp - very happy
Jamie - Completed - a few niggles to resolve but happy. Adaptronic fitted & tuned. Intercooler and crank overlay to come...
Tom Gee - uncompleted - awaiting delivery of charger + MSpnp (mk1 1.8)
Vindi49 - uncompleted - most parts collected, need to make new brackets due to change of engine to Mk2!
Mel - Completed - MS1 v3.0, FMIC, 14% reduction pully - self tuning (for now) - VTPS to go on soon...162 pre tuning, FMIC and smaller pulley..
 

·
changing gear is over rated
Joined
·
1,703 Posts
Barry Spiers - Completed - MS1 v3, FMIC, 11% reduction pully, LC-1 O2, Duel TB's, Tuned & Dyno'd at 200hp - very happy
Jamie - Completed - a few niggles to resolve but happy. Adaptronic fitted & tuned. Intercooler and crank overlay to come...
Tom Gee - uncompleted - awaiting delivery of charger + MSpnp (mk1 1.8)
Vindi49 - uncompleted - most parts collected, need to make new brackets due to change of engine to Mk2!
Mel - Completed - MS1 v3.0, FMIC, 14% reduction pully - self tuning (for now) - VTPS to go on soon...162 pre tuning, FMIC and smaller pulley..
Offroading - collecting parts - Building a DIYPNP at the mo, LC-1, have charger, intercooler, 1.8 engine, 2 TBs, 320 injectors, just need pipework making really.
 

·
Registered
Joined
·
918 Posts
Barry Spiers - Completed - MS1 v3, FMIC, 11% reduction pully, LC-1 O2, Duel TB's, Tuned & Dyno'd at 200hp - very happy
Jamie - Completed - a few niggles to resolve but happy. Adaptronic fitted & tuned. Intercooler and crank overlay to come...
Tom Gee - uncompleted - awaiting delivery of charger + MSpnp (mk1 1.8)
Vindi49 - uncompleted - most parts collected, need to make new brackets due to change of engine to Mk2!
Mel - Completed - MS1 v3.0, FMIC, 14% reduction pully - self tuning (for now) - VTPS to go on soon...162 pre tuning, FMIC and smaller pulley..
Offroading - collecting parts - Building a DIYPNP at the mo, LC-1, have charger, intercooler, 1.8 engine, 2 TBs, 320 injectors, just need pipework making really.
G-Money - DIYPNP built - LC-1 installed - Supercharger delivered - Awaiting purchase of air filter and getting an MOT oh, and probably an intercooler as i'm running the smaller nose pully
 

·
Previous Grand Master
Joined
·
2,536 Posts
Barry Spiers - Completed - MS1 v3, FMIC, 11% reduction pully, LC-1 O2, Duel TB's, Tuned & Dyno'd at 200hp - very happy
Jamie - Completed - a few niggles to resolve but happy. Adaptronic fitted & tuned. Intercooler and crank overlay to come...
Tom Gee - uncompleted - awaiting delivery of charger + MSpnp (mk1 1.8)
Vindi49 - uncompleted - most parts collected, need to make new brackets due to change of engine to Mk2!
Mel - Completed - MS1 v3.0, FMIC, 14% reduction pully - self tuning (for now) - VTPS to go on soon...162 pre tuning, FMIC and smaller pulley..
Offroading - collecting parts - Building a DIYPNP at the mo, LC-1, have charger, intercooler, 1.8 engine, 2 TBs, 320 injectors, just need pipework making really.
G-Money - DIYPNP built - LC-1 installed - Supercharger delivered - Awaiting purchase of air filter and getting an MOT oh, and probably an intercooler as i'm running the smaller nose pully
Roadsterchinsk - awaiting kit, intercooler, gotech RR tuned locally, 11.5% &17% reduction pulley, 320 injectors, twin TB
 

·
Registered
Joined
·
2,798 Posts
Barry Spiers - Completed - MS1 v3, FMIC, 11% reduction pully, LC-1 O2, Duel TB's, Tuned & Dyno'd at 200hp - very happy
Jamie - Completed - a few niggles to resolve but happy. Adaptronic fitted & tuned. Intercooler and crank overlay to come...
Tom Gee - uncompleted - awaiting delivery of charger + MSpnp (mk1 1.8)
Vindi49 - uncompleted - most parts collected, need to make new brackets due to change of engine to Mk2!
Mel - Completed - MS1 v3.0, FMIC, 14% reduction pully - self tuning (for now) - VTPS to go on soon...162 pre tuning, FMIC and smaller pulley..
Offroading - collecting parts - Building a DIYPNP at the mo, LC-1, have charger, intercooler, 1.8 engine, 2 TBs, 320 injectors, just need pipework making really.
G-Money - DIYPNP built - LC-1 installed - Supercharger delivered - Awaiting purchase of air filter and getting an MOT oh, and probably an intercooler as i'm running the smaller nose pully
Roadsterchinsk - awaiting kit, intercooler, gotech RR tuned locally, 11.5% &17% reduction pulley, 320 injectors, twin TB
Raydar27 - Uncompleted - Making the pipework but all other parts collected (Basic install for the moment - AFPR BIPES)
 

·
Registered
Joined
·
1,102 Posts
Barry Spiers - Completed - MS1 v3, FMIC, 11% reduction pully, LC-1 O2, Duel TB's, Tuned & Dyno'd at 200hp - very happy
Jamie - Completed - a few niggles to resolve but happy. Adaptronic fitted & tuned. Intercooler and crank overlay to come...
Tom Gee - uncompleted - awaiting delivery of charger + MSpnp (mk1 1.8)
Vindi49 - uncompleted - most parts collected, need to make new brackets due to change of engine to Mk2!
Mel - Completed - MS1 v3.0, FMIC, 14% reduction pully - self tuning (for now) - VTPS to go on soon...162 pre tuning, FMIC and smaller pulley..
Offroading - collecting parts - Building a DIYPNP at the mo, LC-1, have charger, intercooler, 1.8 engine, 2 TBs, 320 injectors, just need pipework making really.
G-Money - DIYPNP built - LC-1 installed - Supercharger delivered - Awaiting purchase of air filter and getting an MOT oh, and probably an intercooler as i'm running the smaller nose pully
Roadsterchinsk - awaiting kit, intercooler, gotech RR tuned locally, 11.5% &17% reduction pulley, 320 injectors, twin TB
Raydar27 - Uncompleted - Making the pipework but all other parts collected (Basic install for the moment - AFPR BIPES)

Bert - Completed all bar tuning, MSPnP, intercooler, 11% reduction pulley, 320cc injectors, LC-1, waiting for knocklite.
 

·
Registered
Joined
·
1,701 Posts
Barry Spiers - Completed - MS1 v3, FMIC, 11% reduction pully, LC-1 O2, Duel TB's, Tuned & Dyno'd at 200hp - very happy
Jamie - Completed - a few niggles to resolve but happy. Adaptronic fitted & tuned. Intercooler and crank overlay to come...
Tom Gee - uncompleted - awaiting delivery of charger + MSpnp (mk1 1.8)
Vindi49 - uncompleted - most parts collected, need to make new brackets due to change of engine to Mk2!
Mel - Completed - MS1 v3.0, FMIC, 14% reduction pully - self tuning (for now) - VTPS to go on soon...162 pre tuning, FMIC and smaller pulley..
Offroading - collecting parts - Building a DIYPNP at the mo, LC-1, have charger, intercooler, 1.8 engine, 2 TBs, 320 injectors, just need pipework making really.
G-Money - DIYPNP built - LC-1 installed - Supercharger delivered - Awaiting purchase of air filter and getting an MOT oh, and probably an intercooler as i'm running the smaller nose pully
Roadsterchinsk - awaiting kit, intercooler, gotech RR tuned locally, 11.5% &17% reduction pulley, 320 injectors, twin TB
Raydar27 - Uncompleted - Making the pipework but all other parts collected (Basic install for the moment - AFPR BIPES)
Bert - Completed all bar tuning, MSPnP, intercooler, 11% reduction pulley, 320cc injectors, LC-1, waiting for knocklite.
oakesy2001uk - completed all bar dyno tuning, 1.8, 11% reduction pulley, I/C, MSpnp, 440 inectors, LC-1.
 

·
Previous Grand Master
Joined
·
2,536 Posts
1) Barry Spiers - Completed - MS1 v3, FMIC, 11% reduction pully, LC-1 O2, Duel TB's, Tuned & Dyno'd at 200hp - very happy
2) Jamie - Completed - a few niggles to resolve but happy. Adaptronic fitted & tuned. Intercooler and crank overlay to come...
3) Tom Gee - uncompleted - awaiting delivery of charger + MSpnp (mk1 1.8)
4) Vindi49 - uncompleted - most parts collected, need to make new brackets due to change of engine to Mk2!
5) Mel - Completed - MS1 v3.0, FMIC, 14% reduction pully - self tuning (for now) - VTPS to go on soon...162 pre tuning, FMIC and smaller pulley..
6) Offroading - Uncompleted - collecting parts - Building a DIYPNP at the mo, LC-1, have charger, intercooler, 1.8 engine, 2 TBs, 320 injectors, just need pipework making really.
7) G-Money - Uncompleted - built - LC-1 installed - Supercharger delivered - Awaiting purchase of air filter and getting an MOT oh, and probably an intercooler as i'm running the smaller nose pully
8) Roadsterchinsk - Uncompleted - awaiting kit, intercooler, gotech RR tuned locally, 11.5% &17% reduction pulley, 320 injectors, twin TB
9) Raydar27 - Uncompleted - Making the pipework but all other parts collected (Basic install for the moment - AFPR BIPES)
10) Bert - Completed - all bar tuning, MSPnP, intercooler, 11% reduction pulley, 320cc injectors, LC-1, waiting for knocklite.
11) oakesy2001uk - completed - all bar dyno tuning, 1.8, 11% reduction pulley, I/C, MSpnp, 440 inectors, LC-1.

just attempted to tidy
 

·
Registered
Joined
·
3,535 Posts
1) Barry Spiers - Completed - MS1 v3, FMIC, 11% reduction pully, LC-1 O2, Duel TB's, Tuned & Dyno'd at 200hp - very happy
2) Jamie - Completed - a few niggles to resolve but happy. Adaptronic fitted & tuned. Intercooler and crank overlay to come...
3) Tom Gee - uncompleted - awaiting delivery of charger + MSpnp (mk1 1.8)
4) Vindi49 - uncompleted - most parts collected, need to make new brackets due to change of engine to Mk2!
5) Mel - Completed - MS1 v3.0, FMIC, 14% reduction pully, 320 injectors, LC-1 02, DTB's - self tuning (for now) - VTPS to go on soon...162hp pre tuning, FMIC and smaller pulley..
6) Offroading - Uncompleted - collecting parts - Building a DIYPNP at the mo, LC-1, have charger, intercooler, 1.8 engine, 2 TBs, 320 injectors, just need pipework making really.
7) G-Money - Uncompleted - built - LC-1 installed - Supercharger delivered - Awaiting purchase of air filter and getting an MOT oh, and probably an intercooler as i'm running the smaller nose pully
8) Roadsterchinsk - Uncompleted - awaiting kit, intercooler, gotech RR tuned locally, 11.5% &17% reduction pulley, 320 injectors, twin TB
9) Raydar27 - Uncompleted - Making the pipework but all other parts collected (Basic install for the moment - AFPR BIPES)
10) Bert - Completed - all bar tuning, MSPnP, intercooler, 11% reduction pulley, 320cc injectors, LC-1, waiting for knocklite.
11) oakesy2001uk - completed - all bar dyno tuning, 1.8, 11% reduction pulley, I/C, MSpnp, 440 inectors, LC-1

Roadsterchinsk are planning on running a 6 rib belt with the 17% reduction?
 

·
Registered
Joined
·
1,701 Posts

·
Previous Grand Master
Joined
·
2,536 Posts
Roadsterchinsk are planning on running a 6 rib belt with the 17% reduction?
Not as yet, we were going to tune with 11.5% reduction and then 17% and see what it was like. As its the KMT pulley its relatively easy to swap.
Haven't planed on going to a 6 rib set up at all yet. If the 17% slips too much or is too much for the current set up then we will just run 11.5% for now.
 

·
Registered
Joined
·
729 Posts
1) Barry Spiers - Completed - MS1 v3, FMIC, 11% reduction pully, LC-1 O2, Duel TB's, Tuned & Dyno'd at 200hp - very happy
2) Jamie - Completed - a few niggles to resolve but happy. Adaptronic fitted & tuned. Intercooler and crank overlay to come...
3) Tom Gee - uncompleted - awaiting delivery of charger + MSpnp (mk1 1.8)
4) Vindi49 - uncompleted - most parts collected, need to make new brackets due to change of engine to Mk2!
5) Mel - Completed - MS1 v3.0, FMIC, 14% reduction pully - self tuning (for now) - VTPS to go on soon...162 pre tuning, FMIC and smaller pulley..
6) Offroading - Uncompleted - collecting parts - Building a DIYPNP at the mo, LC-1, have charger, intercooler, 1.8 engine, 2 TBs, 320 injectors, just need pipework making really.
7) G-Money - Uncompleted - built - LC-1 installed - Supercharger delivered - Awaiting purchase of air filter and getting an MOT oh, and probably an intercooler as i'm running the smaller nose pully
8) Roadsterchinsk - Uncompleted - awaiting kit, intercooler, gotech RR tuned locally, 11.5% &17% reduction pulley, 320 injectors, twin TB
9) Raydar27 - Uncompleted - Making the pipework but all other parts collected (Basic install for the moment - AFPR BIPES)
10) Bert - Completed - all bar tuning, MSPnP, intercooler, 11% reduction pulley, 320cc injectors, LC-1, waiting for knocklite.
11) oakesy2001uk - completed - all bar dyno tuning, 1.8, 11% reduction pulley, I/C, MSpnp, 440 inectors, LC-1.
12) regina diffey - Uncompleted - Running DIYMS1 V3.0 NA at the moment (1991 MX-5) with LC-1, have most other parts. Will not be intercooling or smaller SC pulley
 

·
Registered
Joined
·
1,701 Posts
Roadsterchinsk are planning on running a 6 rib belt with the 17% reduction?
Not as yet, we were going to tune with 11.5% reduction and then 17% and see what it was like. As its the KMT pulley its relatively easy to swap.
Haven't planed on going to a 6 rib set up at all yet. If the 17% slips too much or is too much for the current set up then we will just run 11.5% for now.
[/quote]

keep us all updated with it, I'd like to decide on my final pulleys before I pay for my dunk time. Got a few weeks of tuning to do myself first though.
 
1 - 18 of 18 Posts
Top