Mazda MX-5 Miata banner

Grinding On Full Lock

718 views 4 replies 4 participants last post by  Andy64 
#1 ·
Anyone got an idea what might be causing the occasional grinding noise I'm getting when the steering is on full lock.

The pads and discs were changed about 5-6000 miles ago, so I don't think there's a wear problem, but I can feel it through the brake pedal. There is no grinding at all when braking in a straight line or when turning, and the car stays nice and straight when I brake - no pulling or drifting to either side

I first noticed it after I had the alignment done just before Christmas (WIM Fast Road settings), and it only does it every now and then. When I had the alignment done, the steering wheel was about a third of a turn out, this was corrected during the set-up, is there anything that could have been done to cause this??

Cheers
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top