[Graaf]

I am considering fitting some Elise seat and was wondering if anyone has fabricated or obtained a decent fitting bracket to enable Elise Seats to be fitted and look quite neat?

I've tried 'Search' but didn't come up with anything.

Thanks

 

[Si-Mon]

So you didn't notice the whole thread about this with details and pictures approximately 20 threads down from this one in the same section on the same page?

 

[Graaf]

So you didn't notice the whole thread about this with details and pictures approximately 20 threads down from this one in the same section on the same page?

Sorry, I saw that one but didn't see any pictures of the brackets themselves.

I also saw another one with pictures that looked awful.

The problem is that I am not particulary mechanically minded and and also like things to look like they were meant to be there not just odd bits of metal bolted on.

 

[raz128]

There's a thread here http://forum.miata.net/vb/showthread.php?t=358182 that should interest you. The side brackets look rather good and you can devise your own method to make a less ghetto-looking front bracket.

 

[Graaf]

There's a thread here http://forum.miata.net/vb/showthread.php?t=358182 that should interest you. The side brackets look rather good and you can devise your own method to make a less ghetto-looking front bracket.

Thank you, my friend.

That's exactly what I was looking for. I'll have to keep a note of that Miata site.

Thanks Again

 

[Si-Mon]

It isn't a bracket at all. It is a piece of box section and a U shaped bracket.

 

[Graaf]

It isn't a bracket at all. It is a piece of box section and a U shaped bracket.

True but at least it looks like it's meant to be there.

However, if you know of something better I would be greatful to know.