Mazda MX-5 Miata banner
wiring
1-20 of 22 Results
  1. How do I...
    Hi all, Ive got an aftermarket single fan fitted to an ally rad on my mk1 1.8 1995 and would like to wire a toggle switch to turn the fan on as and when. How would I do this please, can someone draw up a diagram showing what wire goes where and what relays/fueses etc I'll need please. At the...
  2. Garage discussion
    Suh dudes.So this is my first post so why not ask the world! it'll be easier to explain my current situation and problem i am facing if i tell the story of how I ended up there.... so bought an AEM UEGO Wideband for my stock 91 eunos roadster, while wiring up the gauge power to the blue...
  3. Mechanical & Electrical
    Hi all, After trawling through old threads in this forum for weeks, as well as circuit diagrams from various different makes and models, I've just sussed out a way to wire up NB2 Headlights in to an NB1 and have the low beams stay on when the high beams are activated, AS WELL as retain a...
  4. Wanted
    Hi, looking for a dash wiring loom for a 1994 eunos v-spec, or a dash wiring loom from an eunos with air con, electric mirros and windows. I threw mine away when swapping for a black interior before realising the looms differ between models!
  5. Mechanical & Electrical
    Hey guys, I'm installing some new to me seats in the mx5 which feature the heating option. These are original seats. In my car there was never the option of heated seats, however the wires running to the seats have the colors that correspond to seat heating wires (light green and light green...
  6. Problems
    Hi there, befire i swap out the alternator,where are the earth straps on the mk1 mx5?
  7. Mechanical & Electrical
    Guys I seriously need some help. I'm half way through turboing my mx5 and I'm stuck with the Ecu, I'm planning to megasquirt it with the ms2 diy kit but I'm struggling to find a wiring/harness guide for the wires from the megasquirt to the cars loom. It's a uk car, 1.8. Year 2000 non vvt.. The...
  8. Forced Induction & N/A Power Mods
    So I've recently done a buy on an AEM Failsafe gauge, boost reference is simple enough to install as is finding power and a ground (taken around by the ECU). I'm wanting to install the gauge and use it in line with my standard ecu for the time being until i can switch to ME221 (just as an...
  9. Mechanical & Electrical
    Hi! I have a rightclick kit and have wired in the red wire to the headed seats, the black, yellow and Yellow and Black to the black wire in the central locking block and the white and White and Black wires into the blue wire as described on another forum with a 1k resistor on the white/black...
  10. Problems
    Hi guys, I've been following in the background for a while, but hopefully someone can help! I've got all my parts together for the Nexus 7 install: http://www.mx5nutz.com/forum/index.php?showtopic=144833, but i now have an engine warning light on the dash. The only thing that happened was to...
  11. Interior
    Hello All. I have finally started my fog light switch panel! I have been going to do this for a while. I have changed the electric window and the warning / light pop up to a toggle style switch, but the fog light area is the last part of my car to still have nasty black plastic switches in...
  12. Mechanical & Electrical
    Hi All, I am trying to wire in my emanage blue to a mk2.5 2002 1.6 Phoenix Mx5. However, i don't have a ecu pinout for this model. The Emanage manual seems to have up 2000, but not thereafter. If someone could help locate one for me, that would be great. Or does anyone have a diagram? An...
  13. Mechanical & Electrical
    Would anyone know where I'd find the wiring diagram (specifically looking for the pin-outs) for the MK3/NC Remote Keyless Entry (RKE) unit? I'm also looking for the same for the clock cluster? :) It's for my 2006 2L Sport if that's of any help..?
  14. I.C.E
    Hi guys, Having a little bit of bother with my Mk1 stereo unit. I took the dash off a few weeks ago and stupidly didn't label up all the connector blocks- I know, silly me :clap: anyway, I have tried to refit it and I seemed to get everything back together as it should be, all of the...
  15. I.C.E
    Hi all, I have an odd request. I would like to re locate my head unit, now I know that in its self is easy but I want to know if this next part is possible and/or easy. Instead of extra dials or a blank I would like to install a retro/vintage car radio in its place and be able to ideally...
  16. Problems
    Hi all, I've recently got a mk1 UK spec MX5 1.6. All has been well up until recently. The other day i noticed my left indicator was giving the 'hyper blink' which lead me to believe one of them must be out, and one was. (The rear). So I replaced the bulb and could see clearly the old bulb had...
  17. I.C.E
    Hello everyone - prepare for stupid questions After late night ebaying i ended up buying the following: 1. Infinity 475A amplifier (4 channel) 2. Mac Fire 300 12" subwoofer The idiot who sold them advertised them as Infinity 1600 Mono amp and Infinity 10" sub (with those pics) - only when I...
  18. How do I...
    Hi, I recently got a hard top with heated rear window. The ends of the two wires coming off the window have been chopped, so I have the wires, but not sure what connects to what. The wires that are coming up from the rear of the car are all good and have the proper connecter. How do I wire it...
  19. I.C.E
    I'm putting in some aftermarket speakers in my 1992 Eunos. Obviously they don't have the socket for the silly plastic plug Mazda put on the factory speakers. The question I have is identifying the + and - wires in the car because I have to change the spade terminals to fit the new speakers. One...
  20. How do I...
    Hi all. I've got an aftermarket set of foglights to fit to my mk1, and I was going to wire them in with a bosch relay and then run it back to a switch in the cabin. My question is, where's the best place to get +12v in the bay to keep the wiring simple? I'm a bit rubbish at electronics so...
1-20 of 22 Results
Top