Search Results for ‘wheels’

Hi guys, I’ve just bought a ‘97 MX5 1.6 and it’s very rear happy, and in turn making it a tad fear inducing when the tyres decide to mimic a slip and slide on hardly damp roads, to try and fix this I’d be looking at replacing the tyres (and checking to make sure the alignment is correct). The...

Around two years ago I decided to venture into restoring some mk1 daisy wheels. I saw a lot of resources and good guides, but mainly within the USA market, so considering two years later the wheels still looked pretty good - I thought I'd write up how I did it for us Brits. First, the materials...

Hey guys! Not a new owner - in fact I have had my Mk 1 BRG for four years now. But finally thought it was worth signing up to the forums. I'm looking to post a guide on how I sprayed my daisies, as Im particularly pleased with how they have turned out. Any suggestions on where to post? Thanks

Hi all, I am looking to buy some light 15x8 track wheels around the East Midlands area. 6ul or RPF1s would be ideal. Thanks

BBS Alloys, 15x6'. These were taken off my old MK1 mx5 several years ago, and have since been stored outside (partially covered). I have the centre caps, wheel nuts (including locking wheel nuts and adapter) and the hub removal tool. The centre caps were stored inside so are good condition...

Hi There New to the Forum, been an MX5 mk2.5 owner for over a year now MK2.5 1.8 Euphonic and have slowly been doing slight modifications to my car now. I'm looking into changing my wheels on my car and fancy the look of some XXr 527. Now my question is will 16 x 8.5 4x100 et0 fit my car...

After a set of 4 BBS OEM alloys, any condition considered reply or PM me if you have anything. Cheers.

I want these wheels!!! (red mk1 in foreground) - but they are not on the mx5parts website. Anyone know where I can find them?

Had these on the car for just under a year. Lightweight hollow spoke version of the 7 spoke OE wheels weighing 4.89kg each according to this: https://www.miata.net/faq/wheel_weights.html 4x100 14x6 ET45 Come with all 4 centre caps. Have gaps between the bolt holes on the mounting face so can...

Hi Guys, My mark 1 Mx5 is mostly used on track but I also use if for summer time driving around the South west. probably about a 60/40% split or maybe 70/30% It's Rotrex supercharged with 275bhp and 208lbft torque. I am currently running 15x7 rota grids with 195/50/15 Yokohama A048 semi...

As per heading, I'm after a decent set (ie not buckled or cracked but some 'weathering' is ok) of standard mk3/nc 16" alloys for my car to use initially for winter tyres but with a view to then using them as my track-day rims. Live in the North West, so can collect or arrange courier. All...

Looking for some new wheels for the 5, as mine have been curbed beyond belief by the previous owner. Like the look of these if anyone has some knocking about? would need to be 17 inch cheers C...

I'm after a set of 16' RX7 FD wheels for my NC. Wouldn't mind a set that needs a refurbish as long as they are straight. The wheels I'm looking for are the below. If you have a set for sale or know someone who does drop me a message!

After a set of either 14" 7 Spokes, or 15" 5 spokes, will need them shipped unless you're in the North West. Let me know price etc and I'll get back to you ASAP. Thanks, Paddy

ENKEI alloys 15" x 6" WITH EUNOS CENTRE CAPS these come with the tyres which are legal, but deflated, i cannot vouch for the roadworthiness...assume just paying for alloys......but they may just pump up and away you go.. good condition , but would benifit from very light refurb if you want...

Hello People, Here I have for sale a set of Zito Alloy Wheels off of a MK2.5. Not much else to say about them, pretty plain 5 spoke design, very similar to OEM RX8 wheels. 16 x 7 4x100PCD I believe are the dimensions. Continental ContiPremium Contact2 with pretty much brand new tread depth...

Hello all, I've been looking for a solution to this for a while and come up empty so far. When driving at low speeds there's a whistling noise coming from the left hand side of the car; some days it's barely noticeable, some days it's really loud! It may happen at higher speed too but I just...

I`ve just booked my Eunos Mk1 in to get it ready for the summer. She`s having a full respray/laquer. To say i`m excited would be a lesson in understatement :dance: Now, the wheels are going to look really tired once the bodywork is done. So with this in mind, I have to get new wheels. I...

Hi all. Anybody have an idea on how to retrieve a color code or just try to get as close as possible to the original paint of a set of rota wheels? I want to spray my rota rbs in bronze but couldn't find any color code anywhere. See below the rota bronze. Also wondering if powder coating...

Hi, looking for Torsen II diff with semi axles to fit in my NA Stainless steel exhaust NA Wheels 15" open to offers no fakes or other crap R package front lip Open to offers ;)