Mazda MX-5 Miata banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 306 Results
  1. MX-5 / Roadster Forum
    Hey everyone. Currently formulating a plan to turbo my car in the future (1996 Monaco edition). I was looking at the SpeedyEFI Ecu for the 90-93 NA6 as I believe this will fit my car and work ( if it won't please let me know hahah). So while looking at the ECU, Vtps and everything I was...
  2. For Sale Kraken turbo kit

    For Sale Ads
    Complete kraken turbo kit for sale. Everything you need to turbo your MX-5 • ME221 ECU • Kraken low mount manifold for 1.6 • Original Garret GT2554r turbo • Complete 2.5" kraken stainless steel exhaust with catalytic converter and test pipe • AEM X-Series wideband • 4 x RX8 injectors •...
    €3,300 EUR
  3. For Sale Ads
    I am going to begin breaking my Turbo NB (1998-2000 1.8 non-VVT) soon, I have a number of goodies that I will be listing for sale and will be offering the turbo bits as a full bolt on plug and play kit, the car was put together in 2018/2019 this consists of the following bits: Genuine...
    £2,500 GBP
  4. Forced Induction & N/A Power Mods
    Hello, Nico here in Cork, Ireland. I'm building a 13B turbo NA with a target of 500hp, and the car will be a road car, but would love to go drag racing with it Here is what I have for the drivetrain so far: -FC Turbo engine -Rx8 5 speed gearbox -FC non-turbo diff (complete assembly, not just...
  5. Problems
    Hi all, this is my first post so hope I’m not asking too much. I’ve recently fitted a TD04 turbo kit for Bofi Racing to my 1997 Mk1 MX5, run alongside an ME221 ecu. The conversion itself was over and done with in good time, but I’ve been trying to iron out electrical/fuelling issues the past...
  6. Forced Induction & N/A Power Mods
    Hi, I've nearly finished my TD04 build and am going to have it tuned to around 170 bhp. At the moment there's a 1.6 clutch and flywheel in it (and 6" diff). Has anyone had success with using a stock 1.8 clutch and flywheel at this sort of power? I think I'll just wait for my clutch to...
  7. For Sale Ads
    For sale is a used Mini supercharger kit for 1.8 MK1 ( I have a bracket for 1.6 as well if required). Please do your research if you are looking to install this kit on a 1.6 or even MK2s. I'm looking for 1.100GBP o.n.o (shipping included). I bought this kit here as we (my mates and I)...
    £1,100 GBP
  8. Mechanical & Electrical
    Hey not sure if this is the correct place to post this but im a owner of a 93 1.6l not sure if i plan on staying at 1.6 or going to 1.8, but anyways i also have a 17 ecoboost that ive put a bigger turbo on and injectors and the whole 9 well long story short me and coworker who also has a miata...
  9. Interior
    Reinstalled the tdo4 that was on before with all same components that ran fine when I got the car. But now my vac line is melting on the wastegate actuator and failing whenever the engine has been under load for about 10 minutes Any ideas as to what may be causing this as the actuator is not...
  10. Members Rides
    Hi all, Have always enjoyed driving and looking at car but relatively new to working on them. So of course the best thing to start off with is strapping a turbo to my car using relatively cheap eBay and Alibaba parts. The car at the moment is a black 1996 with a 199(3) I think high...
  11. For Sale Ads
    A no compromises, award winning, 100% road legal turbo-charged 6-speed 1.8l MK1 MX-5. Fresh MOT (along with a brand new sport-cat), fully serviced, no issues, runs great and is ready to drive away today. Selling due to plans to buy a house. This was a full rebuild and is extremely clean and...
    £9,500 GBP
  12. Forced Induction & N/A Power Mods
    Hi All, wondering if anyone can help, I need to follow the instructions on ME's guide to 'Run a wire from the FP pin in the diagnostic port under the bonnet to pin 2T of the ECU' but i am unsure to which Pin is pin 2T. I have looked at the documentation and at the pinout diagram and wiring...
  13. Forced Induction & N/A Power Mods
    Hi, I am having an issue getting my fuel pump to start during cranking and there onwards, and narrowed it down to likely being the switch in the AFM circuit. I am turboing so the original AFM or MAF has been removed and in place an IAT as part of a kit from black cat with the plug to connect it...
  14. Forced Induction & N/A Power Mods
    Hi all, looking to start turboing my mk2.5 2002 1.6 i've done a fair bit of research so far but i feel like i need parts and jump in to it all and was wondering in if this https://kraken-mx5.eu/product/kraken-3-exhaust-with-january-delivery-deposit-available/ is worth it? I was gonna wait a...
  15. Members Rides
    So I thought I'd start a Project thread before I started tearing the car apart again for the next project. Back in February, I bought this Golden Nugget MX5 and had started buying turbo parts before I'd even bought the car because going from a 300HP WRX to a 140hp MX5 just wasn't going to cut...
  16. MX-5 / Roadster Forum
    So, the car is going up to Mtech soon to get a turbo conversion on my `91 NA (yay) - and I`m curious what the general wisdom is around engine mounts. I may well see some issues giving it the full beans (at 200 WHP) and the torque moving the engine and transmission sufficiently that i miss 3rd...
  17. For Sale Ads
    Time to sell my Mx5 Mk2 RS turbo I've loved owning this car, its brilliant fun and pretty quick too. I used it on some sprint events last year where it rocked, and bought home silverware every time in the 2300cc and over class, various videos available, I'll link below. Mohair soft top is in...
  18. MX-5 / Roadster Vids
    My 1.6 turbo at a very wet Curborough! This was with a relatively aggressive alignment (similar to 949racing dual duty), Yoko AD08R tyres on front, Yoko Parada's on the rear. I did loosen my rear anti-roll bar by one setting but the car still isn't really stiff enough on the front for this...
  19. MX-5 / Roadster Forum
    From Friday I will be the proud owner of a 2016 MX-5 2L manual with just 20K on the clock. I am excited! This followed 6 months of watching YouTube, reading reviews, test driving a Stage 1 BBR RF (I am too tall). I intend to use her as a daily driver (London based :-( ) with regular trips to...
1-20 of 306 Results
Top