Mazda MX-5 Miata banner
na8
1-5 of 5 Results
  1. Forced Induction & N/A Power Mods
    Hello! :) I will soon run this setup: - NA8 Block with BP4W head - 98 NB8 intake manifold + NB rail - H/E - Timing set to 14deg - Stock NA8 ecu I want to raise the fuel on my rail, to not run lean. Does a AFPR is a good idea in my case? I will also add a AFR Gauge+WB to watch my AFR and to...
  2. Forced Induction & N/A Power Mods
    Hello! :domo: Sorry for my bad english... I will be brief... I have a 96 NA8 Miata with two sensor on my exhaust (there is one on the down pipe and the other is after the catalytic (I think it serves to check if the catalytic work correctly). I bought a few weeks ago, a catback mx5parts with...
  3. Wheels, Tyres, Suspension & handling/etc
    Hello! Sorry for my bad english... Today, I changed my old suspensions on my 96' NA8 miata with a friend of mine. Not really difficult but I have some questions because I have doubts... On the instruction manual, it's written: "4. Do not fully tighten the top mount until car is on the...
  4. Wheels, Tyres, Suspension & handling/etc
    Hello! Sorry for my bad english, i'm from France ;) I would like to buy Watanabe B-type with 14x6,5+14,5 specs but I read somewhere on the internet that people who have NA8 could have problem with the brake caliper (apparently the wheel spoke rub against the brake caliper or something like...
  5. Forced Induction & N/A Power Mods
    Hello, I need some help with GTX parts. I hope you may be able to help me out with this one. I have the possibility to own multiple parts from a 323GTX 1.8. Can I bodge a cheap a turbo setup using the GTX parts, or they are just orientated to the wrong directions and they won't work? Do you...
1-5 of 5 Results
Top