Mazda MX-5 Miata banner
ms2
1-19 of 22 Results
  1. Members Rides
    Hey all! So thought I'd post up some details about my build, it's been going on for over a year now so I won't list every update. I'll post some quick snap shots of my progress. To view my build thread in all it's entirety, check out blog or clubroadster thread: http://omgpham.com/...
  2. Forced Induction & N/A Power Mods
    Hello All, After months of reading and fettling, having the Megasquirt and Wideband (AEM) sitting on the side, I have managed to pull together from what feels like all corners of the internet a base map for my stock 1.8 NB and I will be plugging it all together this weekend. However, given...
  3. Members Rides
    Thought i would start a little thread as I've had the car for over a year now. Got it as a winter project and a year later i'm still working on it. Its only had three engines (think i was driving abit erratically) and a few mods, but the plan is to turbo it. This was engine number 2. the...
  4. Newbies! Introduce yourselves here
    Hey, my name is steven, from ireland. have a mk1 1.6 for the last year and a half. wanting to go turbo now so im looking to source bits. i can get alot of what i need in ireland but i cant source an ms2. any help or information from anyone in the uk would be much appreciated. ps. mods can...
  5. Forced Induction & N/A Power Mods
    Hi I am trying to get my car, a 1995 Eunos Roadster to run on a DIY MS2. I have followed this guide http://miataturbo.wikidot.com/ms2-a these are the photos of my build I have had a couple instances in the past where I tried starting the car on ms, it would crank normally but show no...
  6. Forced Induction & N/A Power Mods
    I've had my mk2 1.6 for a while now and have slowly been adding and taking stuff to and from my mx5. I recently purchased a ms2 enhanced and have eventually got it installed BUT I have trouble starting the car when its cold, it seems ok on tick over when its started up. I'm not to good at this...
  7. Forced Induction & N/A Power Mods
    Hi I'm setting up a MS2 on my already turbo'd 5, the ecu wiring looks like it's been hacked about a bit as you can see, this is the longer of the two connectors on the ECU. http://i972.photobucket.com/albums/ae202/arabbetts/IMG_1968.jpg I have been working from this diagram...
    ms2
  8. Forced Induction & N/A Power Mods
    Can someone explain to me how to do a basic road tune using tuner studio and an ms2? Just installed the ms2 and have a track day coming up. Thanks!
  9. Forced Induction & N/A Power Mods
    Ok seen as my car has just passed its MOT yay!! thankyou Mr Roddinson. I thought I'd have a bash at using virtual dyno this is a 4th gear pull (*ahem* on a private road) from about 2kRPM to about 6kRPM i think lol Car's spec is Rev's MS2, homemade manifold/downpipe, td04L from an imprezza and...
  10. Wanted
    Hi There! I am driving a late 1.6 Mk1 and looking to equip it with a MS2 basic or enhanced. I know hard to find but let's give a chance might someone planning to get rid of one unit. Also looking for a ITB that fits the 1.6 engine. Can be aftermarket or a chopped inlet with a motor bike...
  11. Forced Induction & N/A Power Mods
    I installed my megasquirt and wideband today on my standard engine i am pretty sure i have installed everything right and setup everything according to reverants instructions. the engine and afr's seem to be all over the place it won't idle properly and ends up just dying, the air/fuel ratio...
  12. Forced Induction & N/A Power Mods
    The following is my understanding, if any of it is bollocks feel free to shout and tell me: Fitted my cams, put the car back together and it started fine. ardler_dan came around to refine my map for the cams but quickly noticed my PWs were all different. Obviously this means that the AFR (which...
  13. Wanted
    Hello. Im looking for a cheap old laptop for Tunerstudio shenannegans . Ideally running win XP or similar age & ideally with a serial port (thats ancient by pc standards! USB is fine too). I am in Swindon wilts (M4 corridor) and happy to pick up anywhere within a reasonable drive. If its of...
  14. Forced Induction & N/A Power Mods
    Been out most of the night tuning the VE table on my MS2 Enhanced and this is what i've got so far... Based on Background on the car: 99 JDM 10AE (1.8). Stock minus AEM UEGO, GM IAT and that is all! So yeah, any comments and critiques are more than welcome, infact that is exactly what im...
  15. Mechanical & Electrical
    Which boost control solenoids are people using with enhanced MS2's etc? Rev says any with 2 wires. Are there usable ones from a factory vehicles that are easy to get hold of in the UK? Cheers guys.
  16. Forced Induction & N/A Power Mods
    http://www.diyautotune.com/catalog/megasquirtii-programmable-efi-system-pcb30-kit-black-case-p-119.html What else would be needed other than this? Or is this the full kit?
  17. Forced Induction & N/A Power Mods
    Last night I got my MS to fire up, and got some firmware on it (on my kitchen table). Pretty chuffed, as you might imagine! Now - I've made up most of the loom to go from the DB37 connector to the 64-pin ECU socket, but have a question about the grounds that are required. In the MegaManual...
  18. Forced Induction & N/A Power Mods
    Morning, I've almost finished building my MS2 for my ITB build but have a quick question. I added both the VR and Hall / Opto circuits, as I may be using the MS for something else in the not so distant future. I followed the mega manual guide, and bridged the following: Now, my question is...
  19. Forced Induction & N/A Power Mods
    Here we have the beginnings of a basic M45 supercharger and megasquirt installation. I haven't done a lot with engine electronics and ecu's ect before so a bit of a learning curve for me (I can do carbs lol) I know this is nothing new but hopefully this will interesting to a few people out...
1-19 of 22 Results
Top