An extension of my previous query, with a more immediately appropriate title.
Short (ish) story:
I have a professionally installed and mapped MS2 with Innovate LC-2 wideband.
Car - NA6 with headwork, cams and AFM delete, rather than forced induction - is presently running rich...
I am trying do a Swap from a NA 1.6 (90hp) to an NB 1.8 engine, changing ECU to a Megasquirt. All the hardware seems to be done, but the car do not start.
I used 1.8 crank/cam sensors and the ECU seems to be configured to the CAS.
Can anybody tell me how i need to configure to use the...
hi been on here for a while, and I've now decided to do a build thread (three years too late). Its for me really, to remind me what I've done.
Its a mk2 1.6 which I plan on adding a TD04.
Also I enjoy shedding unneeded weight (because its free) :whistle:
Its the first car I did an engine swap...
So thought I'd post up some details about my build, it's been going on for over a year now so I won't list every update. I'll post some quick snap shots of my progress.
To view my build thread in all it's entirety, check out blog or clubroadster thread:
I'm hoping someone can help shed some light on this!
Ive got an Ms2 V3 that was originally built for a Suzuki Swift Gti which ive adapted for use in my '93 Eunos.
followed the instructions as per diyautotune's page...
Not posted for ages so i thought i'd say hello and remind everyone of our services.
We have become very popular in the MX5 world for mapping but you may not be aware we see all sorts of cars.
We map almost all aftermarket ECUs on our in-house 2WD dyno, just mapping accounts for...
Hi all, this is my first post.
I've recently taken ownership of a 2005 1.6 NB, my first MX5. I've done a bit of research and decided to get a Megasquirt before I do anything else. I'm planning to assemble it myself but need a bit of advice on which Megasquirt I need, I've read some things about...
Something that's been bugging me for a while - my idle VE cells are much lower than the adjacent non-idle cells. This doesn't make much sense - the timing is the same, the target AFR is the same (not tuned idle with VEAL) the KPA is roughly the same - the fuel should be similar...
Guys I seriously need some help.
I'm half way through turboing my mx5 and I'm stuck with the Ecu, I'm planning to megasquirt it with the ms2 diy kit but I'm struggling to find a wiring/harness guide for the wires from the megasquirt to the cars loom.
It's a uk car, 1.8. Year 2000 non vvt.. The...
Hello Fellow Mx5 Nutters!
So, i will present you with my research and what opinions I have formed based on said research. But ultimately I am looking for some professional and experienced feedback, to help me make an informed decision.
I am looking to Turbo my car ("Here we go again" you're...
My megasquirt ecu stopped working and we are putting it down to the main chip on the micro squirt board so I could do with a new one if anyone has one. I know loads of people are swapping from megasquirt to the me221 so someone must have one
After months of reading and fettling, having the Megasquirt and Wideband (AEM) sitting on the side, I have managed to pull together from what feels like all corners of the internet a base map for my stock 1.8 NB and I will be plugging it all together this weekend.
Hi all, new to the mx5 scene. Bought myself one on saturday, really enjoying the fun apart from a few issues but that's another topic!
I like playing around with cars for power lol, its just how i am and i'm sure most of you understand ;) just wondering what i need for a megasquirt pnp ecu? i...
my name is steven, from ireland. have a mk1 1.6 for the last year and a half.
wanting to go turbo now so im looking to source bits. i can get alot of what i need in ireland but i cant source an ms2. any help or information from anyone in the uk would be much appreciated.
ps. mods can...
hi guys,i bought an ecu from a guy last weekend MEGASQUIRT MS2 MSLABS ENHANCED PNP for mk2.6 1.6L, i connected it and the car fired straight up and it also connected to the computer, however the map was for a 1.8 and mine was a 1.6 so i tried to change it with little success, then upon opening a...
I am trying to get my car, a 1995 Eunos Roadster to run on a DIY MS2.
I have followed this guide
these are the photos of my build
I have had a couple instances in the past where I tried starting the car on ms, it would crank normally but show no...
I have been messing around with the Mega Squirt all day on the kitchen table and can't find a sodding base map that works anywhere online.
I have a Mk2 1.8 stock engine (atm).
I found one here http://www.megasquirtpnp.com/mspnp2_maps.php that is for Firmware 3.3.1, but as my...
The car I have has a megasquirt, it runs pretty well but it probably needs a couple of tweeks, most notably starting.
All my computer type equipment is made by Apple and I have a desktop computer so I can't use that in the car. Am I right in thinking iPads won't work well with megasquirt? My...