Search Results for ‘mazda’

Find on eBay: 1999 MX5 / MX-5 MK2 NB 1.6 with Hard Top Roof Manual Red Spares or Repair | eBay For sale my lovely little MX5, will be really sad to see it go as always puts a smile on my face but unfortunately, I don't have the time to spend on repair Good bits: It's absolutely ace Runs...

Mazda MX5 Enamel Pin Badge - https://www.etsy.com/uk/listing/637720724/mazda-mx5-enamel-pin-badge These enamel badges are based on a classic JDM icon - The MK1 Mazda MX5. - Measures 30mm - Plated in black - Coloured with soft enamel - Metal clasp fitting on the rear These are high quality pin...

Hi guys, I was wondering if anybody knew how to find out the paint code for their Mazda? I've got a MK2.5 MX5 Pheonix in Black, red/black interior. Parts have rusted, others have got scratched and chipped. I plan to tackle a panel at a time, but before I do anything like that... I need to...

Cheers

Hi Folks, Looking for mk1 mx5 Mazdaspeed side skirts. Open to carbon miata copies either. I'm in Southern Ireland so must be willing to courier, at my expense. Just thought I'd check if anyone selling before I buy new. Thanks, David.

Here are my Custom Side Skirts on a Budget. I didn't want to pay £80/100 on side skirts and not be sure I liked them on the car. So I went down the DIY route, total cost was £30 and I'm pretty happy with the finished product! Here's a materials list. 95mm PVC Plastic Trim £10 Black Vinyl...

Hi all, basically I bought my Eunos with this tax disc holder in the window, and I'd like to remove it Looks like quite a nice one, it's a metal Mazda branded one and requires an allen key to remove the back plate. However, the front appears to be glued to the glass which I haven't come across...

After a change in circumstances I sold my Kawasaki Ninja and was on the hunt for something with 4 wheels and again Japanese. Considered quite a few old Hondas but in the end the price and grin factor of the MX-5 Mk1 won me over. And the pop-up headlights of course. Current plan for the car is...

I'm after a set of 16' RX7 FD wheels for my NC. Wouldn't mind a set that needs a refurbish as long as they are straight. The wheels I'm looking for are the below. If you have a set for sale or know someone who does drop me a message!

Just around the corner from work this morning, whilst I was half asleep, I noticed a light blue MK1 which looked very tidy. Looked lowered with black rims and a black front splitter. At a quick glance going pasted I am pretty sure there was a roll cage in there as well. I'd be interested to know...

Just a quick one for you MX5 fanatics. Where is the best place to get a MK1 hardtop from? Had a little look around and don't really have a clue what would be the go to website as I can't find one on MX5parts and all the others I've looked at are second hand. Look forward to hearing from you...

Hi guys, I am looking into purchasing a MK1 MX5 as my first project car. I have been reading through a lot of projects on this site over the last few weeks and I've been loving what I've saw so far. Today I thought I would register an account and get peoples advise. What do I need to look for...

Hello. I just replaced my suspension with oem shocks and tein s-tech springs. However, the car appeared to be leaning a little to one side, even after i changed the suspension. Uppon closer inspection, the distance between the wheel cap and the arch is a half inch lower on the drivers side than...

Hello fellow Nutzers. I've been on here for a long time, and not said much. Hope to make up for that here! I'm helping to organise a Mazda event, at Kirkistown Circuit, Co.Down, on Sunday, 9th of July. Most of you will be aware of 7's day. A celebration of the RX-7 and other Rotary powered...

Hi all, For sale is my 2004 (54 plate) MX-5 Mk2.5 finished in what my opinion is the best colour; Strato Blue. I'm selling because there simply isn't enough room for it on our driveway anymore and as I have another car at the moment I could use the space. It's done around 76,000 miles and is...

Hi everyone, thought I'd start a build thread for my Mk1. So, I've got a 1.8 MX5, a 1996 reg. Bought back around August 2016, but only properly been working on it for the last 3 months or so. The previous owner, for whatever reason, called him 'Yoshi', so it's kind of stuck with him :paperbag...

Hey everyone, Thought I'd introduce myself :yes: I'm Jake, 19 from Liverpool, and recently (ish) got myself a 1996 MK1 MX5. Thought I'd say hi, as I'll probably be askng a fair few questions here! :unsure: Been around cars all my life, but I'm new to Mazda's! Here he is at the minute...

Hi guys, so this is my first car, a 1994 brg mx-5. And with the car came a list of problems, and the list keeps on growing :rant: The first thing i need to deal with is buying another centre cap for one of the wheels, only problem is i have been unable to identify the wheels as of yet. If...

Hi, I'm matthew from cumbria. I am currently looking into getting an MX5 as a track car, but I am not sure where to start. I am looking for a mk1 but I am unsure what to look for in a decent car. Any help pointing me in the right direction for getting start would be greatly appreciate...

Hey everyone! Friendly heads up, I stumbled upon a sale of the MX5 ECU from Link Engine Management! $710 USD plus shipping!! The only US dealer that I've found w/ the ECU online is here: https://www.motorsportselectronics.com/products/link-g4-mazda-mx5-gtr-r-plug-in-ecu?variant=20255176004...