Mazda MX-5 Miata banner
manifold
1-20 of 42 Results
  1. For Sale Ads
    Folks, I'm putting up for sale my RSR*R 4-1 Manifold for MK1 NA6CE - 1.6 litres ! This is a lovely JDM manifold and gives great performance at the top end. It's wrapped with a DEI (design engineering) fibreglass wrap and sealed with their high temp silicone spray. The flexi section is in...
  2. Mechanical & Electrical
    I know this has probably been brought up before but I'm needing a new manifold for my car as the standard one is on the road out. I came across this toyosport manifold on good old eBay...
  3. Wanted
    No longer needed
  4. Wanted
    Hi, I'm looking for a full exhaust system for an MK2 1.8 including the manifold. Got a new back box, so don't mind if it comes without. I'm located in Birmingham but don't mind travelling or paying postage. Cheers :)
  5. Wanted
    Looking for an NA/Mk1 Exhaust Manifold for a 1.8, ideally a 4-1 or a 4-2-1? Would require posting, but if you can package I can organise a courier. Cheers, Scott
  6. Forced Induction & N/A Power Mods
    Introduction This is not a turbo build project but a turbo "rebuild" project using original parts that were on the car when I bought it e.g. Garrett GT2560r turbo, injectors, intercooler, pipework, Megasquirt ECU, alloy radiator, oil cooler, boost gauge and a brand new Revent T2 manifold...
  7. Wanted
    As in title, I'm after Arc intake chamber, some good condition bucket seats and Jasma manifold for mk1 1.8.
  8. For Sale Ads
    So, due to lack of time to dedicate to this project I am finally selling my ITB setup. I think this is the first time I'm putting up a "for sale" ad so let me know if something is amiss. The "kit" is composed of: T3 / Techno toy Tuning manifold, specific for the BP4W and BPZ3 heads (MK2 1.8)...
  9. General Car Chat
    Hi, any thoughts about this manifold ? Couldn't find any opinions on forums. Was wondering if it is worth the money (199), anyone who has some experience with this brand ??? I am thinking about buying aluminium radiator from them as well and want to know if it's good quality. Thanks!
  10. For Sale Ads
    MX5 1.6 FM Ceramic Zircotec Turbo Manifold This is a Flyin Miata unit but with a EWG added on. The manifold has had a Zircotec ceramic coating done to keep engine bay temperatures down & keeps the gas hotter, which improves the flow. Turbosmart Ultragate 38mm EWG 14psi External Wastegate. Not...
  11. Forced Induction & N/A Power Mods
    hi, is there and sensible priced manifold and downpipe for sale that arn't ebay crap? cheers!
  12. Forced Induction & N/A Power Mods
    I've been having trouble with my manifold cracking, it's the second time it's cracked now at the turbo flange and I need to address some fundamental issues before I commission a new manifold. The manifold is a tubular stainless steel underslung design with the turbo hanging off it, currently...
  13. Forced Induction & N/A Power Mods
    Do you find your car sometimes makes a buzzing or rattling noise from the manifold side of the engine? Either at full throttle at certain points, or during low speed maneuvering when close to a stall...? Some of you may think this is just a side effect of having a 4-1 manifold which can easily...
  14. Forced Induction & N/A Power Mods
    Hi all, Recently purchased a 4-1 IL Manifold for my 2.0 NC1, not totally sure on what route to go next and could use some advice/more information. I've got an mx5parts backbox with an ebay job St/St straight through centre section. Adding the manifold will remove all my CAT's. Whats the best...
  15. Newbies! Introduce yourselves here
    hi names dean from portsmouth but now living in cyprus due to my job im looking for a turbo manifold t25/t28 and other bits and bobs for my build so if any of you have stuff knocking around let me know
  16. MX-5 / Roadster Forum
    I would just like to share my experience of fitting a Toyosports Exhaust Manifold and Downpipe, please anyone else with experience here or similar feel free to add or correct something I have done or said. Car: 1997 Mk1 1.8, UK Spec. (470mm cat) Do not buy the Toyosports downpipe for this car...
  17. Forced Induction & N/A Power Mods
    I have a uk mk1 1.8 with a 440mm cat (1995/6). I have a mx5 parts single exit stainless exhaust fitted. Apart from egr delete, what else am I going to have to do to fit a jdm hks 4-2-1 manifold? I still need to retain a cat for mot. Is it a case of fitting a 370mm cat or do I need to get the...
  18. Wanted
    Hi guys n gals I've asked before but I'll ask again just in case, I've got myself a supercharger, engine management, wideband, throttle body and bypass valve but now I need the bracketry and manifolds, so.... Has anyone got the brackets and manifolds for sale or are willing to part with them...
  19. Mechanical & Electrical
    does anyone know if a 1.8 mk2 manifold will fit my mk1?The reason i ask is i have split mine on the bend and although its repairable the I've been informed that jasma uses poor steel and i from what I've seen is there is lots of wee cracks and holes on the manifold itself! so i will be looking...
  20. Wanted
    Hi there, I'm looking for a mk1 I'm restoring a complete exhaust line, from manifold to catback, in stainless steel. No preferences on the branding, and no preferences on catback exhaust tip size/side (can be left, right, dual or even center exit). Any chance one of you would have that and...
1-20 of 42 Results
Top