Search Results for ‘lsd’

Hi everyone! I am looking for a set of Driveshafts which are the bolt-on flange type. but it must be the 80mm space between hole centres for special editions as mine is a 1.8L V-Special 1993

Hi everyone, new member here! i recently snapped my diff on my 1994 1.8 Eunos. the driveshafts have been severely damaged therefore i need new ones. i have replaced my limited slip diff with one from a 1.8 Mk2. my original driveshafts were bolt-on instead of the push-in variant, however i can...

Hi I have my mk3 mx5 2.0 sport for sale. Looking for £4300 but open to offers for a quick sale. Car listed on ebay under mx5 mk3 2.0 sport Thanks

As the title suggests, looking for a 3.6 Torsen from a mk2.5 S-VT to replace my knackered Super Fuji diff. Thanks!

Hi all As above, I'm trying to locate a Torsen LSD with a 3.6:1 ratio to fit to my MK1 Eunos. If anyone has one, I'd love to hear from you. Thanks

Help please in diagnosing! Mk2.5 1.8 sport with LSD making a horrid noise :-( When driving it makes this noise when I lift off the throttle on the road, coasting etc but NOT on throttle. On stands it makes exactly the same noise. CV's feel OK, not to much play. Used a 'tube' on the diff and...

So currently in restore mode on my Mark 1 before I add mods, a couple of bits I need first. Some MX5 seats, Mark 1 or 2, doesn't really matter! My drivers side seat has a 4 inch hole in the base and I'd rather replace both with the same set! I need some carpet if possible to fit into a mark...

Good Evening All, Was after a little help if possible, I have a Mazda mx5 NC 2.0 (65K) So my problem began with a grinding noise, SEEMED to be coming from passenger side rear wheel, it is most definitely 'metal on metal'. Had heat coming from that wheel (more heat than the others anyway) after...

I've got a new, boxed Ashcroft Transmissions LSD but have found a 2 way plated diff so may as well sell it. It's an ATB type diff, so essentially the same in action as a Torsen ... only it's brand new and not with unknown mileage and condition! Ashcroft have decided not to make any more of...

Hey everyone, Just a quick one- I have been searching around trying, can you buy brand new differentials, ideally LSDs for the Mk1? I am still trying to get my head around differentials, but if I am understanding them correctly, they are not so much a wear and tear item? Which may explain why...

Here we have my 1994 Eunos Roadster 1.8 turbo. I bought it fairly standard and have made it to what you see now. There is a build thread on members ride's on here with some work I've done on it. The turbo kit is a rare HKS kit for the 1.8 engines and cost £1500. The spec follows: 1994 import...

Hi guys, Strictly speaking I don't actually have an MX5 - but I have an E30 with a Torsen differential and you guys seem to know your stuff regarding Torsens. I'm having issues with mine currently and your forum always comes up in my searches so I thought I'd give it a shot. I'll try to keep...

Hi all - as above. Can collect if in the Lincolnshire/Nottinghamshire region. Cheers

Good afternoon everyone, I've recently been reading up on differentials and the different types as it is an area where I have absolutely no knowledge. I seem to be getting my head around them a bit more now, enough to know that my 1996 1.8 Gleneagles has an open diff, which means it transfers...

so i feel i now need longer gears, i have a 5 speed with 4.3 torsen which came stock in my 1.8 eunos S. but now im running 269 and will be dropping a forged engine in over the winter and go for more+ i think longer ratio will suit my build better as i need 3rd gear to hit 60 and thats alot of...

Hi, this is my first post on here :) I have a 2002 1.6 and looking to fit an LSD onto my car but the only one I can find is this on ebay: http://www.ebay.co.uk/itm/MX5-Mk1-1-6-Smooth-Type-Viscous-Limited-Slip-Differential-VLSD-/121718438989?_trksid=p2054897.l4275 Will it fit straight onto my...

Hi all, I took my car to Brian (Mazdaman) in Bicester yesterday - lovely guy, by the way - and he has found that I need a diff, as the one I've got is falling to bits inside. The car is a 2003 mk2.5 1.8 Sport with the 6-speed box, so I need the right diff for this. I'm not sure which is the...

As per subject, have a LSD off my old 1.8 mk2 and am looking to get a 1.8 mk2.5 to fit it to. Was going to try and get one with LSD already but there's a few tidy examples out there without one so would like to know what else is required to fit it (if anything at all?)? Thanks in advance

bit of advise/feedback if you have experience with this. I am running a 1.8 Torsen type 1 diff with the shafts and prop in my 1991 1.6 turbo. Just taken the car for a battering round Silverstone and thinking of maybe trying a KAAZ 1.5 way diff. ?????????