looking to lower my 2003 mk2.5 SVT.
if I’m correct, this car should have Blisterien shocks. Im looking to lower the car whilst keeping a comfortable ride and not sacrificing performance.
I intend to put some 15” wheels on too.
what do you recommend for this specific model? As...
I have a 1990 mx5 and am looking into getting it lowered, but I'm not 100% sure which route to go down.
I am tempted to go for the Eibach lowering springs on mx5parts etc.
However there are also "prosport" lowering springs which are suspiciously cheap. Does anyone have any experience with...
Selling of my old suspension, as i fitted some coilovers a new months ago.
mk1 bilsteins with h&rsprings, i belive the shock tobe original so done around 90k and the springs i fitted back in 2005 but are very good condition.
handles amazing on track but being honest can be a little harsh on...
MK2.5 Sport (so already comes with upgraded Bilstein shocks from factory), now lowered 35mm using H&R 35mm Lowering Springs.
Thought I'd put it on here because I couldn't find many pictures/ much help before buying my springs.
Although not 'low', its low enough to look a lot better and still...
I have a Mk3 hardtop convertible, Standard springs and it sits fairly high, It would probably be at home on an off road rally course. Is it worth upgrading and lowering the springs by 30mm or even more? I know this is a fairly common mod on the Nc but what would be a rough cost of having them...
Friend has just purchased a NC and is looking for recommendations in the Reading area to fit lowered springs and do a full geo set up.
I know that WIM is only an hour away but any other recommendations close to home (RG30)?
I'm looking to lower my 2003 1.8 Sport. I pulled the NSF wheel off recently to inspect the current setup and found the following:
I believe these are the bilsteins that were standard fit to this model, can anyone confirm?
I'm looking to lower the car around 30-35mm. Whilst saving for a...
Just bought some Bilsteins from an older SV-T to go on my "SPORT S" equipped SV-T (The black shocks etc.).
Will I need anything else for these to go on correctly? Bushes, bump stops etc.?
Also, EIbach or Teins, to go on these Bilsteins?
Thanks in advance all!
Hi all, I'm new to this forum so bare with me!
I'm picking up my first MX5 on Saturday and wanting to lower it with some Eibach springs by 30mm. Will the standard shocks be able to cope bearing in mind I'm not going to be using it for track days and only as a everyday car for getting to work...
I have recently got my MX5 back on the road and it is now fitted with a TR Lane full cage. Car is a Mk1 1.8
I have the harness lap belt mounted in the orignal seatbelt mounting points behind the base of the seat - is this considered acceptable? It seems tome that the angle...