Hi all, Ive got an aftermarket single fan fitted to an ally rad on my mk1 1.8 1995 and would like to wire a toggle switch to turn the fan on as and when. How would I do this please, can someone draw up a diagram showing what wire goes where and what relays/fueses etc I'll need please. At the...

Hi there, I recently bought an Eunos Roadster NA 1.8 and its got an overheating issue. - The coolant system/heater core has been flushed out multiple times until the water runs clear - The waterpump was replaced 8000km ago and i have checked to confirm it was actually replaced - I bought a...

Hi there, I recently bought a roadster that has its cooling fan wired to a switch which allows you to manually turn the cooling fan on and off. I would like to remove this setup and have the fan turn on normally as the car gets to temp. In place of the fan relay that's meant to be in fuse box...

Hi All, I've just had the headgasket done and am looking to find out if the thermo sender is duff - because my dash temp gauge currently reads near the 1 o'clock position....the same as when the car overheated before the hg went! So using an infrared thermometer I measured the temperature of...

Hey everyone, Having a slight issue with my cooling system following the installation of a new alloy rad and silicone cooling hoses. Cooling fan won't come on and I've let the car idle waiting for it to switch on only to have steam start coming out of the rad (I assume this is the car starting...

Hi guys, can you help me?! I've just replaced my radiator cooling fan and the fan sensor on the top of the waterpump at the weekend on my '92 Eunos as it wasn't working before. Today after coming home from work on this nice day 17 degrees outside(A journey of 8.3 miles) I popped the bonnet and...

I'm looking to upgrade my fan to keep the car cooler when I'm driving/drifting a bit hard. does anybody have any suggestions or knowledge from experience on this. I'm not overly keen on getting rid of the air con to use the second fan which i know is stupid as it doesn't even work. idealy id...

Afternoon. So I thought I would split this part off of an existing thread of mine as I get the feeling I'm having two separate problems running side by side and don't wish for one to get lost. For the full back story: http://www.mx5nutz.com/forum/index.php?showtopic=140678 To condense...

Evening gents, New to the forum and first post, so here it goes. I have recently picked up a 1994 MX-5 1,8 here in CH. 150,000km on the clock and generally clean. Few issues to sort before presenting her for the infamous MFK (Swiss MOT). Other issues I'll post in separate threads, but for now...

so i have a mk1 import 1.6, started overheating a while ago, only in traffic or slow moving and constant starting and stopping, runs fine on motorway or at speed. ive changed the thermostat and changed the coolant. theres no leaking that i can see. the radiator and fans have been replaced by...

Hi guys! I recently removed all traces of my A/C whilst I was doing a head gasket replacement. I understand that you need a bypass pipe or something to get the heater to work. I haven't fitted one, but the heater still works. Is this normal? I dont know if its weaker power than usual, but it...

Don't like the idea of the fan only covering one side of the radiotor when there's more than enough room for two. Looking for a double fan from the Eunos.. Just need to know if this is an easy replace. Is this a matter of unclipping the old one from the connector and fitting the new one in? Or...

so when im drifting and giving it some beans i would like to have the controll over the second fan on my rad. i have a switch ready to go and im hopeless with that magic stuff you call electronics so if anyone could give me any advice that would be much apreciated or even if anyone has done...

so when im drifting and giving it some beans i would like to have the controll over the second fan on my rad. i have a switch ready to go and im hopeless with that magic stuff you call electronics so if anyone could give me any advice that would be much apreciated or even if anyone has done...