Maruha F-Cam For Bp (Nb) - Garage discussion - MX5Nutz Forum

Jump to content

These ads only show for users who are not registered or logged in


Maruha F-Cam For Bp (Nb)

NA tuning camshafts

  • Please log in to reply
1 reply to this topic

#1 reiko


    One post wonder

  • New Members
  • 1 posts
  • Location:Slovakia

Posted 20 November 2020 - 12:42 PM

Hello guys,

I was searching like crazy, but I couldn't find any information regarding the Maruha F-CAMS for mx-5 NB 1.8 http://www.maruhamot...camvernext.html

I am going to do engiune OH and the stuff that they are saying looks really great to add up their pisotns, camshafts and shims under bucket.
They are talking about 184 Hp and it looks really crazy power and that torque is fenomenal.
When I compare it to the ohter stuff that I could find on the internet there is nothing going near it as there are not so many upgrades...

Does anyone have any clue, or better some experience with them??

For the info I think Tomei is selling those camshafts too, they are names Tomei PONCAM for MX5 they are claiming about 170HP  https://rev9autospor...m-camshaft.html

In the end I would be happy for the 170hp for the price of MS3 mini pnp, camshafts some high compression pistons, shim under buckets ...

  • 0

#2 Dickie


    Nutz regular

  • Members
  • PipPipPipPip
  • 534 posts
  • Gender:Male
  • Location:Cornwall

Posted 20 November 2020 - 08:28 PM

Hi Reiko,


I am running an 1800 Eunos using Piper 285 regrinds Mk2.5 block Mk 2 flowed /skimmed head shim under buckets and bike throttle bodies.

I have 169 BHP at 6500 Rpm which makes the car a bit more lively.

I have seen the Mahura spec on their site




There is a lot of work needed to make it all work properly as well as $$$$$

Have a look at Garage Quinn Miata on the internet for ideas.


Good Luck








  • twitter.png
  • digg.png
  • delicious.png
  • reddit.png
  • stumble.png
  • email.png
  • print.png
  • download.png


  • 0

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users