Jump to content

Miata RoadsterGSM PerformanceArdler AutomotiveAdvertise on MX5NutzMazda on TrackSky InsuranceWheels in MotionMX5 PartsAK AutomotiveRoddisons MotorsportOpie OilsMX5Nutz ShopDriftworks.comSportDrive

These ads only show for users who are not registered or logged in


Photo

Loads Of Modifcations For Mk1 And Mk2's


  • Please log in to reply
51 replies to this topic

#1 Tech

Tech

    Getting there

  • Members
  • PipPip
  • 63 posts
  • Gender:Male
  • Location:Cardiff

Posted 05 June 2012 - 02:25 PM

All parts are plus postage, pics available on request but please do not ask for them unless you are serious about buying. I am good mates with Madda who will confirm I am genuine and wont rip you off. In fact, some of these bits are his because they are in my garage and he has no time to sell them.
Items will be posted promptly.

Mx5 Standard Bits
Drivetrain � MX5 � 6 speed box � �280
Drivetrain � MX5 � Torsen 3.6 Diff, shafts, Prop � �260
Interior � MX5 � Red carpet and some red plastics � �60
Drivetrain � Mx5 mk1 5 speed gearbox � �25
Interior � MX5 � Roof catches � �20
Interior � MX5 � seatbelts � �15
Exterior � Mx5 mk2 P door (silver) � �15
Engine � MX5 � Fuel filler neck - mint � �10

Mx5 Mods
Exterior � MX5 � Lockwood front grille � �20
Engine � MX5 � Jackson racing oil cap red � �20
Engine � K&N Airfiler � �10
Interior � MX5 � Drift button � �10
Interior � MX5 � Steering wheel boss (Mk2) � �10
Interior � MX5 � Steering wheel boss (Mk1) With cover � �15

General Parts
Engine � AEM wideband (no guage) � �75
Interior � MomoCorse bucket seat (4kg) � �75
Interior � Driftworks 4 point TRS harnesses (FIA not valid after 2012) � �60
Interior � Momo Steering wheel � �40
Interior � Sabelt TRW Blue harnesses (non FIA) � �35
Interior � 3� 5 Point blue harnesses � make unknown (B2G) � �35
Engine � Cusco Catch oil can � �35
Engine � Walbro - filter fixing broke � �35
Interior � HKS Temp Gauge (no sender) 60mm � �20
Interior � Swoosh Oil temp 60mm � �15
Interior � Swoosh oil temp 60mm � �15
Interior � Auto meter carbon boost guage 52mm � �15
Engine � Shiny Oil catch can � �15
Interior � Savage boost gauge 52mm � �10

PLEASE PUT THE PART YOU ARE INTERESTED IN, IN THE TITLE OF THE PM. THANKS.

:)
  • 0

#2 ncockrell

ncockrell

    Getting there

  • Members
  • PipPip
  • 80 posts
  • Gender:Male
  • Location:Essex
  • Interests:Rugby,Cricket,Gaming,Cars

Posted 05 June 2012 - 02:40 PM

Hey. have you got any coilovers? and interresred in the slam panel. could you send pic please?
  • 0

#3 hooligan

hooligan

    internet warrior

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 10918 posts
  • Gender:Male
  • Location:newhaven, east sussex
  • Interests:anything that begins with F.....

Posted 05 June 2012 - 02:42 PM

sent a PM on the arc panel and zunsport grill cheers
  • 0
Posted Image

#4 RoyMi6

RoyMi6

    Getting there

  • Members
  • PipPip
  • 98 posts
  • Gender:Male
  • Location:Scotland

Posted 05 June 2012 - 02:44 PM

Interested in the front grille and air filter.

What condition is the grille in? Was looking to buy new but would buy at asking if it's in good nick.

Also is the air filter just that, a filter, or is it a typhoon kit or similar? Again would buy at asking if this is the case.

Cheers,
Roy
  • 0
Posted Image

#5 DavesBRG5

DavesBRG5

    Spends way too much time on Nutz

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 8744 posts
  • Gender:Male
  • Location:Bedfordshire UK
  • Interests:Collecting Grandkids

Posted 05 June 2012 - 02:44 PM

Pics of the 2 front grilles please
  • 0
1992 ROADSTER 1.6 Tanabe Sustec suspension, Cusco bracing, BBS Alloys, Momo Prototipo steering wheel, Mike Satur TT Hoops, Jass Performance interior bling.

CHECK OUT MY RIDE


Posted Image

#6 StarletRick

StarletRick

    Tea of the Sea

  • Members
  • PipPipPipPipPip
  • 700 posts
  • Gender:Male
  • Location:Essex bruv'

Posted 05 June 2012 - 02:46 PM

those OMP seat mounts, are they for sidemounted seats?

dibs if they are.
  • 0
Posted Image
-----------------tctuning.net-----------------

#7 V6Hughes

V6Hughes

    Nutz regular

  • Members
  • PipPipPip
  • 264 posts
  • Gender:Male
  • Location:Shropshire

Posted 05 June 2012 - 02:58 PM

Is the vented headlight cover nearside of offside? any chance of seeing a pic
  • 0

#8 tattoo-ron

tattoo-ron

    Spends way too much time on Nutz

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 10276 posts
  • Gender:Male
  • Location:HERTFORD,HERTS

Posted 05 June 2012 - 03:01 PM

pmd driftworks harnesses.
  • 0
fat people are harder to kidnap

#9 Lt. T

Lt. T

    Expert in Idiocracy

  • Members
  • PipPipPipPipPip
  • 947 posts
  • Gender:Male
  • Location:Stoke
  • Interests:my track/road bikes,
    my mx5,
    xbox and ps3,
    photography
    and generally being gay in my mx5

Posted 05 June 2012 - 03:26 PM

Pm'd carbing number plate holder
  • 0
Clickity Click to see my progress thread

#10 dabofoppo

dabofoppo

    Nutz regular

  • Members
  • PipPipPip
  • 148 posts
  • Gender:Male
  • Location:Kildare, Ireland

Posted 05 June 2012 - 03:30 PM

Engine … AEM wideband … £75


PM sent.
  • 0

#11 Drew.

Drew.

    Advanced Nutzer

  • Members
  • PipPipPipPipPipPip
  • 1182 posts
  • Gender:Male
  • Location:S.E Essex

Posted 05 June 2012 - 03:32 PM

PM'd re:AEM wideband.
  • 0
Mk 1 RS-Ltd / SGI rods / SuperTech 8.6:1 Pistons / ACL Race Bearings / ARP Fasteners / Boundary Engineering Street Oil Pump / Turbo Technics S186 Hybrid T28 Turbo / Flyin Miata Inconel studs & Stage 8 locking hardware / 550cc RC Engineering Injectors / Emerald K3 ECU / Custom Intercooler / '99 head / Walbro In Tank Fuel Pump / Flyin Miata Stage 1 clutch / 37mm Koyo rad / 'Bert' Coolant re-route / 13 Row oil cooler / HKS Super Drager 2.5" exhaust / Meister R Zeta S/ TRL GP bar / Elise seats / 949 6UL's 15 x 8 / 949 Racing 270mm Front and rear brake kit / Hankook RS2's / 240BHP 213Ft/Lbs 75* AIT's Stopped mapping ;-(

#12 KevSeymour

KevSeymour

    Nutz regular

  • Members
  • PipPipPip
  • 358 posts
  • Gender:Male
  • Location:Stevenage

Posted 05 June 2012 - 03:35 PM

Is the vented headlight cover nearside of offside? any chance of seeing a pic


Also interested in this.
  • 0

#13 pickmeup

pickmeup

    Carbon parts for Mk1s

  • Registered Traders
  • PipPipPip
  • 266 posts
  • Gender:Male
  • Location:Bristol

Posted 05 June 2012 - 04:44 PM

pm'd regarding fuel rail
  • 0

#14 mdh

mdh

    Nutz regular

  • Members
  • PipPipPip
  • 167 posts
  • Gender:Male
  • Location:Gloucestershire

Posted 05 June 2012 - 05:52 PM

Does the turbo have a manifold?
  • 0

#15 Mx5 Dan

Mx5 Dan

    Dan

  • Registered Traders
  • PipPipPipPipPipPipPipPipPip
  • 7151 posts
  • Gender:Male
  • Location:Lancashire.
  • Interests:http://www.universal-intercoolers.co.uk

Posted 05 June 2012 - 06:47 PM

Pm'd re slam pannel
  • 0
Alloy Rads now back in Stock - £120 (Mk1) £129 (MK2) plus £10 delivery

www.Universal-Intercoolers.co.uk
Sales@universal-intercoolers.co.uk

Youtube video of intercooler kits
https://www.youtube....h?v=v9cqVCKgr7A

Full Listing of Parts available (Intercoolers, Alloy Rads, Body kit parts, Wide arches, Alloy washer bottles, Fans, Scuttle covers etc etc)
http://www.mx5nutz.c...70#entry1224503

#16 Ricarous

Ricarous

    Advanced Nutzer

  • Members
  • PipPipPipPipPipPip
  • 1697 posts
  • Gender:Male
  • Location:Leafy Lytham in Lancashire
  • Interests:Fettling, modifying, Judo, Taekwondo, and Running (albeit for the benefit of the dogs)

Posted 05 June 2012 - 07:02 PM

Also interested in the K&N filter depending on which type panel or cone and is it for a mk1 or mk2 ?

I'm after a Mk1 1.8 panel filter

Cheers Ric
  • 0
Posted Image
Mk1 Eunos Roadster 1.8 with Mazdaspeed airbox, Arc Magic Chamber, 14x6.5 et14.5 Rs Watanabe Type-B's, Gaz coilovers with Swift springs and Cusco pillowball topmounts, Cusco front tower brace, Carbing rear tower brace, ?Jdm stainless exhaust, Fujitsubo Giken 4-2-1 manifold, Custom side mount plate, Vitaloni M2 mirrors, Zoom filler cap, Zoom side repeaters, Carbing style tow hooks, AWD gauge cover,Nardi classico wheel, Rs Aizawa headlight lid, Beatrush Rad Pannel, P5 Sport-rails, Joyfast knob, Flushed Vindi Ducktail, more coming soon...

Mexy Build thread: http://www.mx5nutz.c...wtopic=34507=

Mertyl Build thread: http://www.mx5nutz.c...wtopic=82081=

#17 Sniff-my-diff

Sniff-my-diff

    Getting there

  • Members
  • PipPip
  • 97 posts

Posted 05 June 2012 - 07:05 PM

Hi have you an exhaust system?
  • 0

#18 mx5clark

mx5clark

    Made a start

  • Members
  • Pip
  • 41 posts
  • Gender:Male
  • Location:Kings Lynn
  • Interests:Motorsport

Posted 05 June 2012 - 07:45 PM

Where are you located?
  • 0

#19 mk1_salami

mk1_salami

    Boost junkie

  • Members
  • PipPipPipPipPipPip
  • 1434 posts
  • Gender:Male
  • Location:Fife, Scotland
  • Interests:Anything with an engine.

Posted 05 June 2012 - 08:02 PM

PM'd about the Diff and Carpets / interior plastics.
  • 0
Forged 1.9 Eunos in Brilliant Black ~ GT2871R .86, 6 speed, MSPNP, Gaz Gold Pro, Rota K7 15x9 225/45/15 R888, Energy Bushes, Wilwood Dynalites, sport 276mm rears, 3" exhaust, Bride Zeta 2, FM2 Cast Manifold, BEGI Seperated DP, 550x225x65 Intercooler, Mishimoto radiator, ID1000's, F1 Stage 3 Clutch, Devils own W/I, Innovate MTX-L, Inconel studs, Hard Dog M2.

Westfield SEIW Hayabusa Turbo 'R700'

#20 Malcolm Mazda

Malcolm Mazda

    Nutz regular

  • Members
  • PipPipPip
  • 255 posts
  • Gender:Male
  • Location:Norfolk/Suffolk Border

Posted 05 June 2012 - 09:18 PM

Good to see you have the same issue with harnesses that I do?! Anyway, to go through yours -

Interior … Driftworks 4 point TRS harnesses (FIA not valid after 2012) … £60 - is this for a pair - if so I'll take them!

Interior … Pair or Blue LUKE harnesses – like new! (No FIA markings) … £45 - 3/4/5/6 point?

Interior … Sabelt TRW Blue harnesses (non FIA) … £35 - 3/4/5/6 point?

Interior … 3” 5 Point blue harnesses – make unknown (B2G) … £35 - no thanks - no 5th hole!

Interior … Sparco Black harnesses (Non-FIA) … £30 - 3/4/5/6 point?

Ta, Ian
  • 0

Ian J (Norfolk IP21)

(1) 1991 1.6 Classic Red JR Supercharged
(2) 1990 1.6 BBR turbo track car (Le Mans Imposter!)
(3) 1997 1.8is Classic Red, Intercooled Begi Turbo
(4) 1994 1.8 (ex BRG MX-5) MEV Exocet (Nearly done)
(5) 1991 1.8s Classic Red MK1/MK2 hybrid with FM2 Turbo (long term in progress!)
(6) 2002 1.8s VT Crystal Blue Metallic - the intended MEV Exocet donor?! ;-)

East Anglia MX5 hood fitter for Peter Jones @ www.mazmania.co.uk
Trying not to drive in real life like I do on Forza 4 or GT5!!





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users