Read this: Trading and advertising on the forum - Conditions and how to enquire
These ads only show for users who are not registered or logged in
Bc Racing Coilovers Fitted By Wim
Posted 22 August 2010 - 11:54 AM
Before all the work started you can see she's riding fairly high!
Then it was down to business in the workshop
I think she looks pretty clean underneath, having been undersealed by a previous owner
Then on to having the suspension set up for "fast road"
and then the end result
On the drive home I could really tell the difference over the stock suspension that was pretty tired. She now rides likes she's on rails with minimal roll into the corners. Yes, she's a bit fimer that she was before, but I'm quite happy with that, although I have the ability to soften her up if I get a bit of grief from the misses.
I'd like to thank Tony at WIM for all his guidance in what would be the best suspension and set up for me and to the lads who did all the hard work in the workshop, and also Mark (Mr Jibberingloon) at NCB Motorsport for supplying the BC Racing coilovers which after a couple of months now, I'm still really pleased with. I'd have no problem using these guys again.....thanks again
It's amazing what a difference in ride height can also make to the looks of the car!
Posted 22 August 2010 - 01:44 PM
Posted 22 August 2010 - 03:41 PM
Posted 22 August 2010 - 06:26 PM
Will get the hood replaced next, probably a mohair and will then look at some new wheels, funds allowing!
Posted 23 August 2010 - 08:33 AM
Hopefully see you for the meet on bank holiday monday
Posted 23 August 2010 - 07:18 PM
Glad you like them.....
Posted 24 August 2010 - 07:08 PM
Can I ask what exhaust that is? Looks like it might be MX5parts offering, looking into my options at present. I'm getting a set of coilovers fitted next week and then plan to book her in to WIM soon after for the same treatment your beauty had; any advise on most suitable height setting for nicely lowered stance but able to cope with standard speed humps?
Posted 24 August 2010 - 08:12 PM
He's running wheel centre to arch 12" / 305mm F&R, I'm running 300mm front, 315mm rear and both pretty usable yet slammed ride heights (around 50mm lower than stock I believe)
Posted 25 August 2010 - 08:32 PM
Posted 31 August 2010 - 06:55 PM
I really enjoyed my time at WIM who were great in letting me ask questions and actually see for myself what was going on as they were fitting the coilovers. Top job by all thru advice, ordering, delivery and fitting.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users