Jump to content

Absolutely ShocksRomford MazdaAdvertise on MX5NutzRacing Beat EuropeMazda on TrackSky InsuranceMX5 PartsAK AutomotiveRoddisons MotorsportOpie OilsMX5Nutz ShopDriftworks.comSportDriveGSM PerformanceArdler AutomotiveJJC Race and RallyJap StyleJass Performance

These ads only show for users who are not registered or logged in


Photo

Mx5 Turbo Kit


  • Please log in to reply
19 replies to this topic

#1 Oridori

Oridori

    Getting there

  • Members
  • PipPip
  • 51 posts
  • Gender:Male
  • Location:Luxembourg

Posted 02 October 2012 - 12:31 PM

MX5 Turbo Kit


Since I've moved on to a different car, I'm selling a close to new (1k miles) Flyin Miata Turbo Kit for MX5. It's the Voodoo II Kit for MK2 1.6. (http://www.flyinmiata.com/). Can be fitted to other models but needs some mods (header, piggy back, aso.) It used to be on my MX5 for a short time which can be seen in this thread: http://www.mx5nutz.c...hl=oridori&st=0

Comes with everything required to make it run - FMIC with piping, Garrett GT2560R turbo, BOV, header, turbo elbow, downpipe, intake piping and filter, oil and water lines, oil plug for sump, Voodoo Box (piggy back ecu), boost gauge, gauge pod

I can even add a brandnew cometic headgasket, RX7 injectors, fuel pump and ACL bearings for pistons and crank if you aim for more power and if I get close to my asking price.

Posted Image

Ready to be shipped.

1500£ ONO including everything listed and postage anywhere in EU.


  • 0

#2 proteinator

proteinator

    Nutz regular

  • Members
  • PipPipPip
  • 245 posts
  • Gender:Not Telling

Posted 02 October 2012 - 01:07 PM

Pm sent!
  • 0

#3 ste

ste

    PANDAfactory

  • Members
  • PipPipPipPipPipPipPipPip
  • 4,728 posts
  • Gender:Male
  • Location:West Sussex

Posted 02 October 2012 - 01:10 PM

Bargain!
  • 0

#4 Mx5 Dan

Mx5 Dan

    Dan

  • Registered Traders
  • PipPipPipPipPipPipPipPipPip
  • 9,831 posts
  • Gender:Male
  • Location:Lancashire.

Posted 02 October 2012 - 01:49 PM

Great price and kit :D
  • 0

ALLOY RADS CURRENT GROUP BUY (click me)

 

Mx5 tuning parts :- Intercooler kits / Widebands / body kits / Arches / Alloy Rads / Used Performance parts / Wheels etc

 

Websites:

www.Fast5.co.uk

 

Like us on Facebook:

Fast5

 

banner_zpsf20edf80.gif

 

 


#5 b4bby

b4bby

    Advanced Nutzer

  • Members
  • PipPipPipPipPipPip
  • 1,542 posts
  • Gender:Male
  • Location:Lincolnshire

Posted 02 October 2012 - 06:38 PM

Has this sold yet???
  • 0

#6 timgsxr

timgsxr

    Nutz regular

  • Members
  • PipPipPipPip
  • 509 posts
  • Gender:Male
  • Location:Alnwick, Northumberland

Posted 02 October 2012 - 07:01 PM

Wish somebody would draw a template for that induction box doodar!!!
  • 0

#7 Oridori

Oridori

    Getting there

  • Members
  • PipPip
  • 51 posts
  • Gender:Male
  • Location:Luxembourg

Posted 02 October 2012 - 09:46 PM

Provisionally sold.
  • 0

#8 Vindi (Russell)

Vindi (Russell)

    Spends way too much time on Nutz

  • Registered Traders
  • PipPipPipPipPipPipPipPipPipPip
  • 11,155 posts
  • Gender:Male
  • Location:Under the car in a pool of oil...

Posted 03 October 2012 - 01:52 PM

Wish somebody would draw a template for that induction box doodar!!!


Someone has...
  • 0

Ducktail Spoilers for Mk1, Mk2 & Mk2.5,  Fibreglass Ducktail Bootlids for Mk1

Retro Roll Bars for Mk1, Mk2 & Mk2.5

Coming Very Soon - Track Day Roll Bar for Mk1, Mk2 & Mk2.5

 

http://www.projectem.co.uk/


#9 timgsxr

timgsxr

    Nutz regular

  • Members
  • PipPipPipPip
  • 509 posts
  • Gender:Male
  • Location:Alnwick, Northumberland

Posted 03 October 2012 - 01:56 PM


Wish somebody would draw a template for that induction box doodar!!!


Someone has...


Feel free to divulge...
  • 0

#10 jiri.l

jiri.l

    Nutz regular

  • Members
  • PipPipPipPipPip
  • 954 posts
  • Gender:Male
  • Location:Aberdeen

Posted 03 October 2012 - 08:28 PM



Wish somebody would draw a template for that induction box doodar!!!


Someone has...


Feel free to divulge...


Flyinmiata :whistle: :D
  • 0

#11 hal9million

hal9million

    Nutz regular

  • Members
  • PipPipPip
  • 286 posts
  • Gender:Male
  • Location:Lymington

Posted 29 October 2012 - 11:29 PM

Is this still available..?
  • 0

THE DISCO POTATO! Scaring the hell out me every day!! :drool:


#12 b0builder

b0builder

    she's alive :)

  • Members
  • PipPipPipPipPipPipPipPip
  • 4,957 posts
  • Gender:Male
  • Location:Rossendale

Posted 30 October 2012 - 12:34 AM




Wish somebody would draw a template for that induction box doodar!!!


Someone has...


Feel free to divulge...


Flyinmiata :whistle: :D


Be nice if you posted the link
  • 0

 hsd dampers, ms2 edu  lc1, new super pro bushes all-round, watanbe splits with federal rs-r, wilwood callipers on front green stuff pads on rear hel brake lines, mx5 dual exhaust, begins turbo with intercooler 550cc ev14 injectors, 3.6 lsd, spec 2+ 1.8 clutch with lightened flywheel, bmw vtps mod, 235bhp  and a empty wallet but a big smile on my face[/font][/color]

 

white mk2 1.8 98 rs standard except for miester shocks


#13 Driftmonkey

Driftmonkey

    Keyboard 'worrier'

  • Banned
  • PipPipPipPipPipPipPipPip
  • 4,993 posts
  • Gender:Male
  • Location:Gone

Posted 30 October 2012 - 09:08 AM

I think he was saying flying miata have the template as they make them. Rather than rip off someone's design......
  • 0
Carbonmiata have a group buy on, a pair of fibreglass front wings £170 delivered to your door, no hidden import fees!
Plus other crazy deals

Get on that like a fat kid on cake.
http://www.mx5nutz.c...howtopic=141343

#14 jiri.l

jiri.l

    Nutz regular

  • Members
  • PipPipPipPipPip
  • 954 posts
  • Gender:Male
  • Location:Aberdeen

Posted 30 October 2012 - 03:38 PM

I think he was saying flying miata have the template as they make them. Rather than rip off someone's design......


:thumb-up: exactly
  • 0

#15 Vindi (Russell)

Vindi (Russell)

    Spends way too much time on Nutz

  • Registered Traders
  • PipPipPipPipPipPipPipPipPipPip
  • 11,155 posts
  • Gender:Male
  • Location:Under the car in a pool of oil...

Posted 31 October 2012 - 09:57 AM


I think he was saying flying miata have the template as they make them. Rather than rip off someone's design......


:thumb-up: exactly


Yep, that was my meaning... people are too keen to rip off peoples hard work :baseballbat:

Russell.
  • 0

Ducktail Spoilers for Mk1, Mk2 & Mk2.5,  Fibreglass Ducktail Bootlids for Mk1

Retro Roll Bars for Mk1, Mk2 & Mk2.5

Coming Very Soon - Track Day Roll Bar for Mk1, Mk2 & Mk2.5

 

http://www.projectem.co.uk/


#16 timgsxr

timgsxr

    Nutz regular

  • Members
  • PipPipPipPip
  • 509 posts
  • Gender:Male
  • Location:Alnwick, Northumberland

Posted 31 October 2012 - 10:07 AM



I think he was saying flying miata have the template as they make them. Rather than rip off someone's design......


:thumb-up: exactly


Yep, that was my meaning... people are too keen to rip off peoples hard work :baseballbat:

Russell.


I thought your business was pretty much making copies of existing stuff, albeit making them better in the process?
  • 0

#17 grantn91

grantn91

    One post wonder

  • New Members
  • 1 posts

Posted 31 October 2012 - 10:52 AM

still selling the turbo kit?
  • 0

#18 Vindi (Russell)

Vindi (Russell)

    Spends way too much time on Nutz

  • Registered Traders
  • PipPipPipPipPipPipPipPipPipPip
  • 11,155 posts
  • Gender:Male
  • Location:Under the car in a pool of oil...

Posted 31 October 2012 - 02:31 PM




I think he was saying flying miata have the template as they make them. Rather than rip off someone's design......


:thumb-up: exactly


Yep, that was my meaning... people are too keen to rip off peoples hard work :baseballbat:

Russell.


I thought your business was pretty much making copies of existing stuff, albeit making them better in the process?


No my "business" (i.e. what I do when I'm not at work) is making ducktail spoilers which I designed and made 100% from scratch. Obviously I looked at what was out there, and it is going to be similar to some other designs, the number of options out there makes it impossible for it to be totally different.
I have made some gauge pods in the past but that was just the first stage in making a one piece crash pad... again, they are not copies although yes they are similar to 3 other types of gauge pods out there... again, how can they not be similar... they are round and made for a standard 52mm gauge!

Russell.
  • 0

Ducktail Spoilers for Mk1, Mk2 & Mk2.5,  Fibreglass Ducktail Bootlids for Mk1

Retro Roll Bars for Mk1, Mk2 & Mk2.5

Coming Very Soon - Track Day Roll Bar for Mk1, Mk2 & Mk2.5

 

http://www.projectem.co.uk/


#19 timgsxr

timgsxr

    Nutz regular

  • Members
  • PipPipPipPip
  • 509 posts
  • Gender:Male
  • Location:Alnwick, Northumberland

Posted 31 October 2012 - 02:33 PM

Fairdoos.
  • 0

#20 Driftmonkey

Driftmonkey

    Keyboard 'worrier'

  • Banned
  • PipPipPipPipPipPipPipPip
  • 4,993 posts
  • Gender:Male
  • Location:Gone

Posted 31 October 2012 - 08:06 PM

And if you have the time and some skills you could make your own airbox. A friend of mine has made his own and he's not a fabricator by trade or anything, bit of common sense and some basic hand skills and you should be ok. Unless you fancy a nice carbonfibre one, but there's a company that might be able to help you out there.....
  • 0
Carbonmiata have a group buy on, a pair of fibreglass front wings £170 delivered to your door, no hidden import fees!
Plus other crazy deals

Get on that like a fat kid on cake.
http://www.mx5nutz.c...howtopic=141343




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users